STM32WB55VCV7 데이터 시트보기 (PDF) - STMicroelectronics

부품명

상세내역

제조사

STM32WB55VCV7

Multiprotocol wireless 32-bit MCU Arm®-based Cortex®-M4 with FPU, Bluetooth® 5 and 802.15.4 radio solution

STMicroelectronics 

STM32WB55xx STM32WB35xx

Functional overview

3.10

Clocks and startup

The STM32WB55xx and STM32WB35xx devices integrate several clock sources:

 LSE: 32.768 kHz external oscillator, for accurate RTC and calibration with other

embedded RC oscillators

 LSI1: 32 kHz on-chip low-consumption RC oscillator

 LSI2: almost 32 kHz, on-chip high-stability RC oscillator, used by the RF subsystem

 HSE: high quality 32 MHz external oscillator with trimming, needed by the RF

subsystem

 HSI16: 16 MHz high accuracy on-chip RC oscillator

 MSI: 100 kHz to 48 MHz multiple speed on-chip low power oscillator, can be trimmed

using the LSE signal

 HSI48: 48 MHz on-chip RC oscillator, for USB crystal-less purpose

The clock controller (see Figure 9) distributes the clocks coming from the different

oscillators to the core and the peripherals including the RF subsystem. It also manages

clock gating for low power modes and ensures clock robustness. It features:

 Clock prescaler: to get the best trade-off between speed and current consumption,

the clock frequency to the CPU and peripherals can be adjusted by a programmable

prescaler

 Safe clock switching: clock sources can be changed safely on the fly in run mode

through a configuration register.

 Clock management: to reduce power consumption, the clock controller can stop the

clock to the core, individual peripherals or memory.

 System clock source: four different clock sources can be used to drive the master

clock SYSCLK:

– 16 MHz high-speed internal RC oscillator (HSI16), trimmable by software, that can

supply a PLL

– Multispeed internal RC oscillator (MSI), trimmable by software, able to generate

12 frequencies from 100 kHz to 48 MHz. When a 32.768 kHz clock source is

available in the system (LSE), the MSI frequency can be automatically trimmed by

hardware to reach better than ±0.25% accuracy. The MSI can supply a PLL.

– System PLL that can be fed by HSE, HSI16 or MSI, with a maximum frequency of

64 MHz.

 Auxiliary clock source: two ultralow-power clock sources that can be used to drive

the LCD controller and the real-time clock:

– 32.768 kHz low-speed external crystal (LSE), supporting four drive capability

modes. The LSE can also be configured in bypass mode for an external clock.

– 32 kHz low-speed internal RC (LSI), also used to drive the independent watchdog.

The LSI clock accuracy is ±5%. The LSI source can be either the LSI1 or the LSI2

on-chip oscillator.

 Peripheral clock sources: Several peripherals (RNG, SAI, USARTs, I2Cs, LPTimers,

ADC) have their own independent clock whatever the system clock. Two PLLs, each

DS11929 Rev 10

41/193

57

Share Link: