STM8AP5268TCX Просмотр технического описания (PDF) - STMicroelectronics

Номер в каталоге

Компоненты Описание

производитель

STM8AP5268TCX

Automotive 8-bit MCU, with up to 128 Kbyte Flash, data EEPROM, 10-bit ADC, timers, LIN, CAN, USART, SPI, I2C, 3 to 5.5 V

STMicroelectronics 

STM8AF526x/8x/Ax STM8AF6269/8x/Ax

Electrical characteristics

Table 21. Current characteristics

Symbol

Ratings

Max.

Unit

IVDDIO

Total current into VDDIO power lines (source)(1)(2)(3)

100

IVSSIO

Total current out of VSS IO ground lines (sink)(1)(2)(3)

100

Output current sunk by any I/O and control pin

IIO

Output current source by any I/Os and control pin

20

mA

-20

IINJ(PIN)(4)

Injected current on any pin

±10

IINJ(TOT)

Sum of injected currents

50

1. Aexlltepronwael rsu(VpDpDly,. VDDIO, VDDA) and ground (VSS, VSSIO, VSSA) pins must always be connected to the

2. The total limit applies to the sum of operation and injected currents.

3. VcuDrDreIOntisn.cludes the sum of the positive injection currents. VSSIO includes the sum of the negative injection

4. This condition is implicitly insured if VIN maximum is respected. If VIN maximum cannot be respected, the

injection current must be limited externally to the IINJ(PIN) value. A positive injection is induced by VIN >

VDD while a negative injection is induced by VIN < VSS. For true open-drain pads, there is no positive

injection current allowed and the corresponding VIN maximum must always be respected.

Table 22. Thermal characteristics

Symbol

Ratings

Value

Unit

TSTG

TJ

Storage temperature range

Maximum junction temperature

-65 to 150

°C

160

Table 23. Operating lifetime(1)

Symbol

Ratings

Value

OLF

Conforming to AEC-Q100 rev G

−40 to 125 °C

−40 to 150 °C

1. For detailed mission profile analysis, please contact the nearest ST Sales Office.

Unit

Grade 1

Grade 0

DocID14395 Rev 15

61/125

114

Share Link: