ST72652 查看數據表（PDF） - STMicroelectronics
零件编号
产品描述 (功能)
生产厂家
ST72652 Datasheet PDF : 166 Pages
| |||
ST7265x
13.8 I/O PORT PIN CHARACTERISTICS
13.8.1 General Characteristics
Subject to general operating conditions for VDD, fOSC, and TA unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ 1)
Max
Unit
VIL Input low level voltage
VDD = 5.0V
Vss
VIH
Vhys
Input high level voltage
VDD = 5.0V
Schmitt trigger voltage hysteresis 3)
0.7xVDD
400
IL
Input leakage current
IS
Static current consumption 4)
VSS≤VIN≤VDD
Floating input mode
RPU Weak pull-up equivalent resistor 5) VIN=VSS
VDD=5V
VDD=3V
70
100
130
200
CIO I/O pin capacitance 6)
5
tf(IO)out Output high to low level fall time 6) CL=50pF
25
tr(IO)out Output low to high level rise time 6) Between 10% and 90%
25
tw(IT)in External interrupt pulse time 7)
1
0.3xVDD
VDD
±1
200
130
260
V
mV
µA
kΩ
pF
ns
tCPU
.Notes:
1. Unless otherwise specified, typical data are based on TA=25°C and VDD=5V.
2. Data based on characterization results, not tested in production.
3. Hysteresis voltage between Schmitt trigger switching levels. Based on characterization results, not tested.
4. Configuration not recommended, all unused pins must be kept at a fixed voltage: using the output mode of the I/O for
example or an external pull-up or pull-down resistor (see Figure ). Data based on design simulation and/or technology
characteristics, not tested in production.
5. The RPU pull-up equivalent resistor is based on a resistive transistor (corresponding IPU current characteristics de-
scribed in Figure 89). This data is based on characterization results, tested in production at VDD=5V.
6. Data based on characterization results, not tested in production.
7. To generate an external interrupt, a minimum pulse width has to be applied on an I/O port pin configured as an external
interrupt source.
Figure 87Two typical Applications with unused I/O Pin
VDD
10kΩ
ST72XXX
UNUSED I/O PORT
10kΩ
UNUSED I/O PORT
ST72XXX
142/166
Share Link: 