ST72652 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

ST72652

LOW-POWER, FULL-SPEED USB 8-BIT MCU WITH 32K FLASH, 5K RAM, FLASH CARD I/F, TIMER, PWM, ADC, I2C, SPI

STMicroelectronics 

ST7265x

16-BIT TIMER (Cont’d)

11.4.6 Register Description

Each Timer is associated with three control and

status registers, and with six pairs of data registers

(16-bit values) relating to the two input captures,

the two output compares, the counter and the al-

ternate counter.

CONTROL REGISTER 1 (TCR1)

Read/Write

Reset Value: 0000 0000 (00h)

7

0

0 OCIE TOIE FOLV2 FOLV1 OLVL2 0 OLVL1

Bit 4 = FOLV2 Forced Output Compare 2.

This bit is set and cleared by software.

0: No effect on the OCMP2 pin.

1: Forces the OLVL2 bit to be copied to the

OCMP2 pin, if the OC2E bit is set and even if

there is no successful comparison.

Bit 3 = FOLV1 Forced Output Compare 1.

This bit is set and cleared by software.

0: No effect on the OCMP1 pin.

1: Forces OLVL1 to be copied to the OCMP1 pin, if

the OC1E bit is set and even if there is no suc-

cessful comparison.

Bit 7 = Reserved, forced by hardware to 0.

Bit 6 = OCIE Output Compare Interrupt Enable.

0: Interrupt is inhibited.

1: A timer interrupt is generated whenever the

OCF1 or OCF2 bit of the SR register is set.

Bit 2 = OLVL2 Output Level 2.

This bit is copied to the OCMP2 pin whenever a

successful comparison occurs with the OC2R reg-

ister and OCxE is set in the CR2 register.

Bit 1 = Reserved, forced by hardware to 0.

Bit 5 = TOIE Timer Overflow Interrupt Enable.

0: Interrupt is inhibited.

1: A timer interrupt is enabled whenever the TOF

bit of the SR register is set.

Bit 0 = OLVL1 Output Level 1.

The OLVL1 bit is copied to the OCMP1 pin when-

ever a successful comparison occurs with the

OC1R register and the OC1E bit is set in the CR2

register.

88/166

Share Link: