TDA5200 查看數據表（PDF） - Infineon Technologies
零件编号
产品描述 (功能)
生产厂家
TDA5200 Datasheet PDF : 39 Pages
| |||
TDA 5200
ASK Single Conversion Receiver
Electrical Characteristics
5.1.3 AC/DC Characteristics
AC/DC characteristics involve the spread of values guaranteed within the specified voltage and ambient
temperature range. Typical characteristics are the median of the production. The device performance parameters
marked with ■ are not subject to production test. They were verified by design/characterization.
Table 8 AC/DC Characteristics with TAMB = 25 °C, VCC = 4.5 ... 5.5 V
Parameter
Symbol
Values
Unit Note /
Min. Typ.
Max.
Test Condition
Test Number
Supply Current
Supply current
standby mode
IS PDWN
50
70
nA Pin 27 (PDWN)
3.1
open or tied to 0 V
Supply current, device IS 868
operating at 868 MHz
4.8
5.2
mA Pin 11 (FSEL) tied
3.2
to GND
Supply current, device IS 434
operating at 434 MHz
4.6
5
mA Pin 11 (FSEL)
3.3
open
LNA - Signal Input LNI (PIN 3), VTHRES > 3.3 V, High Gain Mode
Average Power Level RFin
at BER = 2E-3
-110
dBm Manchester
■ 3.4
encoded data rate
(Sensitivity)
4 kBit, 280 kHz IF
Bandwidth
Input impedance
fRF = 434 MHz
Input impedance
fRF = 868 MHz
Input level @ 1 dB
compression
S11 LNA
S11 LNA
P1dBLNA
0.873 /
-34.7 deg
0.738 /
-73.5 deg
-10
dBm
■ 3.5
■ 3.6
■ 3.7
Input 3rd order intercept
point fRF = 434 MHz
Input 3rd order intercept
point fRF = 868 MHz
LO signal feedthrough at
antenna port
IIP3LNA
IIP3LNA
LOLNI
-10
dBm Matched input ■ 3.8
-14
dBm Matched input ■ 3.9
-73
dBm
■ 3.10
LNA - Signal Output LNO (PIN 6), VTHRES > 3.3 V, High Gain Mode
Gain fRF = 434 MHz
S21 LNA
1.509 /
138.2 deg
■ 3.11
Gain fRF = 868 MHz
S21 LNA
1.419 /
101.7 deg
■ 3.12
Output impedance,
fRF = 434 MHz
S22 LNA
0.886 /
-12.9 deg
Output impedance,
fRF = 868 MHz
S22 LNA
0.866 /
-24.2 deg
LNA - Signal Input LNI, VTHRES = GND, Low Gain Mode
Input impedance
fRF = 434 MHz
S11 LNA
0.873 /
-34.7 deg
■ 3.13
■ 3.14
■ 3.15
Data Sheet
30
Revision 3.0, 2010-12-28
Share Link: 