ST92250JDV2TC 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

ST92250JDV2TC

8/16-BIT SINGLE VOLTAGE FLASH MCU FAMILY WITH RAM, E³ ™ (EMULATED EEPROM), CAN 2.0B AND J1850 BLPD

STMicroelectronics 

STANDARD TIMER (STIM)

10.2 STANDARD TIMER (STIM)

10.2.1 Introduction

The Standard Timer includes a programmable 16-

bit down counter and an associated 8-bit prescaler

with Single and Continuous counting modes capa-

bility. The Standard Timer uses an output

(STOUT) pin. This pin may be independent pin or

connected as Alternate Function of an I/O port bit.

STOUT can be used to generate a Square Wave

or Pulse Width Modulated signal.

The Standard Timer is composed of a 16-bit down

counter with an 8-bit prescaler. The input clock to

Figure 90. Standard Timer Block Diagram

n

the prescaler can be driven either by an internal

clock equal to INTCLK divided by 4, or by

CLOCK2/1024 derived directly from the external

oscillator, thus providing a stable time reference

independent from the PLL programming (refer to

Figure 90).

The Standard Timer End Of Count condition is

able to generate an interrupt which is connected to

one of the external interrupt channels.

The End of Count condition is defined as the

Counter Underflow, whenever 00h is reached.

CLOCK2/ 1024

STOUT

EXTERNAL

INTERRUPT

INEN INMD1 INMD2

INPUT

&

CLOCK CONTROL LOGIC

INTCLK/4

MUX

STANDARD TIMER

CLOCK

STP

8-BIT PRESCALER

STH,STL

16-BIT

DOWNCOUNTER

OUTMD1 OUTMD2

END OF

COUNT

OUTPUT CONTROL LOGIC

INTERRUPT

CONTROL LOGIC

INTS

INTERRUPT REQUEST

164/429

9

Share Link: