M25P40-VMP6TG/X 查看數據表（PDF） - Numonyx -> Micron

零件编号

产品描述 (功能)

生产厂家

M25P40-VMP6TG/X

4 Mbit, low voltage, serial Flash memory with 75 MHz SPI bus interface

Numonyx -> Micron 

M25P40

8

Initial delivery state

Initial delivery state

The device is delivered with the memory array erased: all bits are set to 1 (each byte

contains FFh). The Status Register contains 00h (all Status Register bits are 0).

9

Maximum rating

Stressing the device above the rating listed in the Absolute maximum ratings table may

cause permanent damage to the device. These are stress ratings only and operation of the

device at these or any other conditions above those indicated in the operating sections of

this specification is not implied. Exposure to absolute maximum rating conditions for

extended periods may affect device reliability. Refer also to the Numonyx SURE Program

and other relevant quality documents.

Table 9. Absolute maximum ratings

Symbol

Parameter

Min. Max. Unit

TSTG

TLEAD

VIO

Storage temperature

Lead temperature during soldering

Input and output voltage (with respect to Ground)(2)

–65 150

°C

see (1) °C

–0.6 VCC +

V

0.6

VCC Supply voltage

–0.6 4.0

V

VESD Electrostatic Discharge voltage (Human Body model)(3) –2000 2000

V

1. Compliant with JEDEC Std J-STD-020C (for small body, Sn-Pb or Pb assembly) and the European

directive on Restrictions on Hazardous Substances (RoHS) 2002/95/EU.

2. The minimum voltage may reach the value of -2 V for no more than 20 ns during transitions; The maximum

voltage may reach the value of VCC+2 V for no more than 20 ns during transitions..

3. JEDEC Std JESD22-A114A (C1 = 100 pF, R1 = 1500 Ω, R2 = 500 Ω).

37/57

Share Link: