ST72521M7 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

ST72521M7

8-BIT MCU WITH NESTED INTERRUPTS, FLASH, 10-BIT ADC, FIVE TIMERS, SPI, SCI, I2C, CAN INTERFACE

STMicroelectronics 

ST72521M/R/AR

SUPPLY CURRENT CHARACTERISTICS (Cont’d)

12.4.7 On-Chip Peripherals

Measured on S72F521R9T3 on TQFP64 generic board TA = 25°C fCPU=4MHz.

Symbol

IDD(TIM)

IDD(ART)

IDD(SPI)

IDD(I2C)

IDD(CAN)

IDD(ADC)

Parameter

16-bit Timer supply current 1)

ART PWM supply current2)

SPI supply current 3)

I2C supply current 4)

CAN supply current 5)

ADC supply current when converting 6)

Conditions

VDD=5.0V

VDD=5.0V

VDD=5.0V

VDD=5.0V

VDD=5.0V

VDD=5.0V

Typ Unit

50

µA

75

400

µA

175

400

µA

400

µA

Notes:

1. Data based on a differential IDD measurement between reset configuration (timer counter running at fCPU/4) and timer

counter stopped (only TIMD bit set). Data valid for one timer.

2. Data based on a differential IDD measurement between reset configuration (timer stopped) and timer counter enabled

(only TCE bit set).

3. Data based on a differential IDD measurement between reset configuration (SPI disabled) and a permanent SPI master

communicationat maximum speed (data sent equal to 55h).This measurement includes the pad toggling consumption.

4. Data based on a differential IDD measurement between reset configuration (I2C disabled) and a permanent I2C master

communication at 100kHz (data sent equal to 55h). This measurement include the pad toggling consumption (27kOhm

external pull-up on clock and data lines).

5. Data based on a differential IDD measurement between reset configuration (CAN disabled) and a permanent CAN data

transmit sequence with RX and TX connected together. This measurement include the pad toggling consumption.

6. Data based on a differential IDD measurement between reset configuration and continuous A/D conversions.

163/199

Share Link: