DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

PIC10F220-I(2006) 查看數據表(PDF) - Microchip Technology

零件编号
产品描述 (功能)
生产厂家
PIC10F220-I
(Rev.:2006)
Microchip
Microchip Technology 
PIC10F220-I Datasheet PDF : 78 Pages
First Prev 51 52 53 54 55 56 57 58 59 60 Next Last
PIC10F220/222
10.1 DC Characteristics: PIC10F220/222 (Industrial)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise specified)
Operating Temperature -40°C TA +85°C (industrial)
Param
No.
Sym
Characteristic
Min Typ(1) Max Units
Conditions
D001
D002
VDD Supply Voltage
2.0 — 5.5
VDR RAM Data Retention Voltage(2) — 1.5* —
V See Figure 10-1
V Device in Sleep mode
D003 VPOR VDD Start Voltage to ensure
Power-on Reset
— Vss —
V See Section 8.4 “Power-on
Reset (POR)” for details
D004
D010
SVDD
IDD
VDD Rise Rate to ensure
Power-on Reset
Supply Current(3)
D020
D022
IPD Power-down Current(4)
ΔIWDT WDT Current(4)
0.05* —
— 170
— 350
— 250
— 450
— 0.1
— 1.0
TBD
TBD
TBD
TBD
TBD
TBD
V/ms
μA
μA
μA
μA
μA
μA
See Section 8.4 “Power-on
Reset (POR)” for details
FOSC = 4 MHz, VDD = 2.0V
FOSC = 4 MHz, VDD = 5.0V
FOSC = 8 MHz, VDD = 2.0V
FOSC = 8 MHz, VDD = 5.0V
VDD = 2.0V
VDD = 2.0V
D024 ΔIADC A/D Current
— 80 TBD μA VDD = 2.0V
Legend: TBD = To Be Determined.
* These parameters are characterized but not tested.
Note 1: Data in the Typical (“Typ”) column is based on characterization results at 25°C. This data is for design
guidance only and is not tested.
2: This is the limit to which VDD can be lowered in Sleep mode without losing RAM data.
3: The supply current is mainly a function of the operating voltage and frequency. Other factors such as bus
loading, bus rate, internal code execution pattern and temperature also have an impact on the current
consumption.
a) The test conditions for all IDD measurements in active operation mode are:
All I/O pins tri-stated, pulled to VSS, T0CKI = VDD, MCLR = VDD; WDT enabled/disabled as specified.
b) For standby current measurements, the conditions are the same, except that the device is in Sleep
mode.
4: Power-down current is measured with the part in Sleep mode, with all I/O pins in high-impedance state
and tied to VDD or VSS.
© 2006 Microchip Technology Inc.
Preliminary
DS41270B-page 53

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]