PIC16CR67-20E/SO 查看數據表（PDF） - Microchip Technology

零件编号

产品描述 (功能)

生产厂家

PIC16CR67-20E/SO

8-Bit CMOS Microcontrollers

Microchip Technology 

PIC16C6X

13.0 SPECIAL FEATURES OF THE

CPU

Applicable Devices

61 62 62A R62 63 R63 64 64A R64 65 65A R65 66 67

What sets a microcontroller apart from other proces-

sors are special circuits to deal with the needs of real-

time applications. The PIC16CXX family has a host of

such features intended to maximize system reliability,

minimize cost through elimination of external compo-

nents, provide power saving operating modes and offer

code protection. These are:

• Oscillator selection

• Reset

- Power-on Reset (POR)

- Power-up Timer (PWRT)

- Oscillator Start-up Timer (OST)

- Brown-out Reset (BOR)

• Interrupts

• Watchdog Timer (WDT)

• SLEEP mode

• Code protection

• ID locations

• In-circuit serial programming

The PIC16CXX has a Watchdog Timer which can be

shut off only through configuration bits. It runs off its

own RC oscillator for added reliability. There are two

timers that offer necessary delays on power-up. One is

the Oscillator Start-up Timer (OST), intended to keep

the chip in RESET until the crystal oscillator is stable.

The other is the Power-up Timer (PWRT), which pro-

vides a fixed delay of 72 ms (nominal) on power-up

only, designed to keep the part in reset while the power

supply stabilizes. With these two timers on-chip, most

applications need no external reset circuitry.

SLEEP mode is designed to offer a very low current

power-down mode. The user can wake from SLEEP

through external reset, Watchdog Timer Wake-up or

through an interrupt. Several oscillator options are also

made available to allow the part to fit the application.

The RC oscillator option saves system cost while the

LP crystal option saves power. A set of configuration

bits are used to select various options.

13.1 Configuration Bits

Applicable Devices

61 62 62A R62 63 R63 64 64A R64 65 65A R65 66 67

The configuration bits can be programmed (read as '0')

or left unprogrammed (read as '1') to select various

device configurations. These bits are mapped in pro-

gram memory location 2007h.

The user will note that address 2007h is beyond the

user program memory space. In fact, it belongs to the

special test/configuration memory space (2000h -

3FFFh), which can be accessed only during program-

ming.

FIGURE 13-1: CONFIGURATION WORD FOR PIC16C61

—

—

—

—

—

—

—

—

— CP0 PWRTE WDTE FOSC1 FOSC0

bit13

bit0

bit 13-5: Unimplemented: Read as '1'

bit 4:

CP0: Code protection bit

1 = Code protection off

0 = All memory is code protected, but 00h - 3Fh is writable

bit 3:

PWRTE: Power-up Timer Enable bit

1 = Power-up Timer enabled

0 = Power-up Timer disabled

bit 2:

WDTE: Watchdog Timer Enable bit

1 = WDT enabled

0 = WDT disabled

bit 1-0:

FOSC1:FOSC0: Oscillator Selection bits

11 = RC oscillator

10 = HS oscillator

01 = XT oscillator

00 = LP oscillator

Register: CONFIG

Address

2007h

© 1997 Microchip Technology Inc.

DS30234D-page 123

Share Link: