PIC16LCR62AT-20E/SS 查看數據表（PDF） - Microchip Technology

零件编号

产品描述 (功能)

生产厂家

PIC16LCR62AT-20E/SS

8-Bit CMOS Microcontrollers

Microchip Technology 

PIC16C6X

Applicable Devices 61 62 62A R62 63 R63 64 64A R64 65 65A R65 66 67

DC CHARACTERISTICS

Standard Operating Conditions (unless otherwise stated)

Operating temperature -40˚C ≤ TA ≤ +125˚C for extended,

-40˚C ≤ TA ≤ +85˚C for industrial and

0˚C ≤ TA ≤ +70˚C for commercial

Operating voltage VDD range as described in DC spec Section 16.1 and

Section 16.2.

Param

No.

Characteristic

Sym Min Typ† Max Units

Conditions

Output High Voltage

D090 I/O ports (Note 3)

VOH VDD-0.7 -

-

V IOH = -3.0 mA,

VDD = 4.5V, -40°C to +85°C

D090A

VDD-0.7 -

-

V IOH = -2.5 mA,

VDD = 4.5V, -40°C to +125°C

D092 OSC2/CLKOUT (RC osc config)

VDD-0.7 -

-

V IOH = -1.3 mA,

VDD = 4.5V, -40°C to +85°C

D092A

VDD-0.7 -

-

V IOH = -1.0 mA,

VDD = 4.5V, -40°C to +125°C

D150* Open-Drain High Voltage

VOD

-

-

14

V RA4 pin

Capacitive Loading Specs on

Output Pins

D100 OSC2 pin

COSC2

15 pF In XT, HS and LP modes when

external clock is used to drive

OSC1.

D101 All I/O pins and OSC2 (in RC mode) CIO

50 pF

*

The parameters are characterized but not tested.

† Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only

and are not tested.

Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the

PIC16C6X be driven with external clock in RC mode.

2: The leakage current on the MCLR/VPP pin is strongly dependent on the applied voltage level. The specified

levels represent normal operating conditions. Higher leakage current may be measured at different input volt-

ages.

3: Negative current is defined as current sourced by the pin.

© 1997 Microchip Technology Inc.

DS30234D-page 167

Share Link: