PIC16LCR65T-04/JW 查看數據表（PDF） - Microchip Technology

零件编号

产品描述 (功能)

生产厂家

PIC16LCR65T-04/JW

8-Bit CMOS Microcontrollers

Microchip Technology 

PIC16C6X

Applicable Devices 61 62 62A R62 63 R63 64 64A R64 65 65A R65 66 67

19.3 DC Characteristics: PIC16C62A/R62/64A/R64-04 (Commercial, Industrial, Extended)

PIC16C62A/R62/64A/R64-10 (Commercial, Industrial, Extended)

PIC16C62A/R62/64A/R64-20 (Commercial, Industrial, Extended)

PIC16LC62A/R62/64A/R64-04 (Commercial, Industrial)

DC CHARACTERISTICS

Param

No.

Characteristic

Input Low Voltage

I/O ports

D030

with TTL buffer

D030A

D031

with Schmitt Trigger buffer

D032 MCLR, OSC1 (in RC mode)

D033 OSC1 (in XT, HS and LP)

Input High Voltage

I/O ports

D040

with TTL buffer

D040A

Standard Operating Conditions (unless otherwise stated)

Operating temperature -40˚C ≤ TA ≤ +125˚C for extended,

-40˚C ≤ TA ≤ +85˚C for industrial and

0˚C ≤ TA ≤ +70˚C for commercial

Operating voltage VDD range as described in DC spec Section 19.1 and

Section 19.2

Sym Min Typ Max Units

Conditions

†

VIL

Vss - 0.15VDD V For entire VDD range

VSS - 0.8V V 4.5V ≤ VDD ≤ 5.5V

Vss - 0.2VDD V

Vss - 0.2VDD V

Vss - 0.3VDD V Note1

VIH

-

2.0 - VDD

0.25VDD - VDD

+ 0.8V

V 4.5V ≤ VDD ≤ 5.5V

V For entire VDD range

D041

with Schmitt Trigger buffer

0.8VDD - VDD V For entire VDD range

D042 MCLR

0.8VDD - VDD

V

D042A OSC1 (XT, HS and LP)

0.7VDD - VDD

V Note1

D043 OSC1 (in RC mode)

0.9VDD - VDD

V

D070 PORTB weak pull-up current

IPURB

50 250 400 µA VDD = 5V, VPIN = VSS

Input Leakage Current (Notes 2, 3)

D060 I/O ports

IIL

-

-

±1

µA Vss ≤ VPIN ≤ VDD, Pin at hi-imped-

ance

D061 MCLR, RA4/T0CKI

-

-

±5

µA Vss ≤ VPIN ≤ VDD

D063 OSC1

-

-

±5

µA Vss ≤ VPIN ≤ VDD, XT, HS and LP

osc configuration

Output Low Voltage

D080 I/O ports

VOL

-

- 0.6

V IOL = 8.5 mA, VDD = 4.5V,

-40°C to +85°C

D080A

-

- 0.6

V IOL = 7.0 mA, VDD = 4.5V,

-40°C to +125°C

D083 OSC2/CLKOUT (RC osc config)

-

- 0.6

V IOL = 1.6 mA, VDD = 4.5V,

-40°C to +85°C

D083A

-

- 0.6

V IOL = 1.2 mA, VDD = 4.5V,

-40°C to +125°C

* These parameters are characterized but not tested.

† Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and

are not tested.

Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the

PIC16C6X be driven with external clock in RC mode.

2: The leakage current on the MCLR/VPP pin is strongly dependent on the applied voltage level. The specified lev-

els represent normal operating conditions. Higher leakage current may be measured at different input voltages.

3: Negative current is defined as current sourced by the pin.

DS30234D-page 202

© 1997 Microchip Technology Inc.

Share Link: