PIC16F616T-I/SL 查看數據表（PDF） - Microchip Technology
零件编号
产品描述 (功能)
生产厂家
PIC16F616T-I/SL Datasheet PDF : 214 Pages
| |||
PIC16F610/616/16HV610/616
15.13 High Temperature Operation
This section outlines the specifications for the
PIC16F616 device operating in a temperature range
between -40°C and 150°C.(4) The specifications
between -40°C and 150°C(4) are identical to those
shown in DS41302 and DS80329.
Note 1: Writes are not allowed for Flash
Program Memory above 125°C.
2: All AC timing specifications are increased
by 30%. This derating factor will include
parameters such as TPWRT.
3: The temperature range indicator in the
part number is “H” for -40°C to 150°C.(4)
Example: PIC16F616T-H/ST indicates the
device is shipped in a tAPE and reel config-
uration, in the TSSOP package, and is
rated for operation from -40°C to 150°C.(4)
4: AEC-Q100 reliability testing for devices
intended to operate at 150°C is 1,000
hours. Any design in which the total oper-
ating time from 125°C to 150°C will be
greater than 1,000 hours is not warranted
without prior written approval from
Microchip Technology Inc.
TABLE 15-13: ABSOLUTE MAXIMUM RATINGS
Parameter
Source/Sink
Value
Units
Max. Current: VDD
Source
20
mA
Max. Current: VSS
Sink
50
mA
Max. Current: PIN
Source
5
mA
Max. Current: PIN
Sink
10
mA
Pin Current: at VOH
Source
3
mA
Pin Current: at VOL
Sink
8.5
mA
Port Current: A and C
Source
20
mA
Port Current: A and C
Sink
50
mA
Maximum Junction Temperature
155
°C
Note:
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the
device. This is a stress rating only, and functional operation of the device at those or any other conditions
above those indicated in the operation listings of this specification is not implied. Exposure above maximum
rating conditions for extended periods may affect device reliability.
DS41288F-page 168
© 2009 Microchip Technology Inc.
Share Link: 