PIC16F689T-I/SO 查看數據表（PDF） - Microchip Technology

零件编号

产品描述 (功能)

生产厂家

PIC16F689T-I/SO

20-Pin Flash-Based, 8-Bit CMOS Microcontrollers with nanoWatt Technology

Microchip Technology 

PIC16F631/677/685/687/689/690

8.7 Analog Input Connection

Considerations

A simplified circuit for an analog input is shown in

Figure 8-6. Since the analog input pins share their con-

nection with a digital input, they have reverse biased

ESD protection diodes to VDD and VSS. The analog

input, therefore, must be between VSS and VDD. If the

input voltage deviates from this range by more than

0.6V in either direction, one of the diodes is forward

biased and a latch-up may occur.

A maximum source impedance of 10 kΩ is recommended

for the analog sources. Also, any external component

connected to an analog input pin, such as a capacitor or

a Zener diode, should have very little leakage current to

minimize inaccuracies introduced.

FIGURE 8-6:

ANALOG INPUT MODEL

VDD

Rs < 10K

VT ≈ 0.6V

AIN

VA

CPIN

5 pF

VT ≈ 0.6V

Note 1: When reading a PORT register, all pins

configured as analog inputs will read as a

‘0’. Pins configured as digital inputs will

convert as an analog input, according to

the input specification.

2: Analog levels on any pin defined as a

digital input, may cause the input buffer to

consume more current than is specified.

RIC

ILEAKAGE(1)

To Comparator

Vss

Legend:

CPIN = Input Capacitance

ILEAKAGE = Leakage Current at the pin due to various junctions

RIC

= Interconnect Resistance

RS

= Source Impedance

VA

= Analog Voltage

VT

= Threshold Voltage

Note 1: See Section 17.0 “Electrical Specifications”

DS41262E-page 100

© 2008 Microchip Technology Inc.

Share Link: