PIC18LF4331T-I/SP 查看數據表（PDF） - Microchip Technology

零件编号

产品描述 (功能)

生产厂家

PIC18LF4331T-I/SP

28/40/44-Pin Enhanced Flash Microcontrollers with nanoWatt Technology, High-Performance PWM and A/D

Microchip Technology 

PIC18F2331/2431/4331/4431

REGISTER 10-2: INTCON2: INTERRUPT CONTROL REGISTER 2

R/W-1

R/W-1

R/W-1

R/W-1

U-0

R/W-1

U-0

RBPU

INTEDG0 INTEDG1 INTEDG2

—

TMR0IP

—

bit 7

R/W-1

RBIP

bit 0

Legend:

R = Readable bit

-n = Value at POR

W = Writable bit

‘1’ = Bit is set

U = Unimplemented bit, read as ‘0’

‘0’ = Bit is cleared

x = Bit is unknown

bit 7

RBPU: PORTB Pull-up Enable bit

1 = All PORTB pull-ups are disabled

0 = PORTB pull-ups are enabled by individual port latch values

bit 6

INTEDG0: External Interrupt 0 Edge Select bit

1 = Interrupt on rising edge

0 = Interrupt on falling edge

bit 5

INTEDG1: External Interrupt 1 Edge Select bit

1 = Interrupt on rising edge

0 = Interrupt on falling edge

bit 4

INTEDG2: External Interrupt 2 Edge Select bit

1 = Interrupt on rising edge

0 = Interrupt on falling edge

bit 3

Unimplemented: Read as ‘0’

bit 2

TMR0IP: TMR0 Overflow Interrupt Priority bit

1 = High priority

0 = Low priority

bit 1

Unimplemented: Read as ‘0’

bit 0

RBIP: RB Port Change Interrupt Priority bit

1 = High priority

0 = Low priority

Note:

Interrupt flag bits are set when an interrupt condition occurs, regardless of the state of its corresponding

enable bit or the global enable bit. User software should ensure the appropriate interrupt flag bits are clear

prior to enabling an interrupt. This feature allows for software polling.

DS39616D-page 100

 2010 Microchip Technology Inc.

Share Link: