ATSAM4LS4BA-AU 查看數據表（PDF） - Atmel Corporation
零件编号
产品描述 (功能)
生产厂家
ATSAM4LS4BA-AU Datasheet PDF : 176 Pages
| |||
ATSAM4L8/L4/L2
9.7 Oscillator Characteristics
9.7.1 Oscillator 0 (OSC0) Characteristics
9.7.1.1
Digital Clock Characteristics
The following table describes the characteristics for the oscillator when a digital clock is applied
on XIN.
Table 9-22. Digital Clock Characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
Units
fCPXIN
tCPXIN
XIN clock frequency (1)
XIN clock duty cycle(1)
50
MHz
40
60
%
tSTARTUP
Startup time
N/A
cycles
1.
These values are based on simulation. These values are not covered by test limits in production or characterization.
9.7.1.2
Crystal Oscillator Characteristics
The following table describes the characteristics for the oscillator when a crystal is connected
between XIN and XOUT as shown in Figure 9-3. The user must choose a crystal oscillator
where the crystal load capacitance CL is within the range given in the table. The exact value of CL
can be found in the crystal datasheet. The capacitance of the external capacitors (CLEXT) can
then be computed as follows:
CLEXT = 2(CL – CSTRAY–CSHUNT)
where CSTRAY is the capacitance of the pins and PCB, CSHUNT is the shunt capacitance of the
crystal.
Table 9-23. Crystal Oscillator Characteristics
Symbol
fOUT
Parameter
Crystal oscillator frequency (1)
Conditions
Min
0.6
f = 0.455MHz, CLEXT = 100pF
SCIF.OSCCTRL.GAIN = 0
f = 2MHz, CLEXT = 20pF
SCIF.OSCCTRL.GAIN = 0
ESR
Crystal Equivalent Series Resistance (2)
f = 4MHz, CLEXT = 20pF
SCIF.OSCCTRL.GAIN = 1
f = 8MHz, CLEXT = 20pF
SCIF.OSCCTRL.GAIN = 2
f = 16MHz, CLEXT = 20pF
SCIF.OSCCTRL.GAIN = 3
f = 30MHz, CLEXT = 18pF
SCIF.OSCCTRL.GAIN = 4
Typ
Max
Unit
30
MHz
17000
2000
1500
Ω
300
350
45
42023GS–SAM–03/2014
121
Share Link: 