ST7MC2N6 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

ST7MC2N6

8-bit MCU with nested interrupts, Flash, 10-bit ADC, brushless motor control, five timers, SPI, LINSCI™

STMicroelectronics 

ST7MC1xx/ST7MC2xx

16 REVISION HISTORY

Table 95. Revision History

Date

April-2005

July-2005

Nov-2005

Revision

Description of Changes

Added one sales type (ST7FMC1K4T6)

Changed port description for MCES in Table 1, “ST7MC Device Pin Description,” on

page 12 and added note 3

Changed register addresses in Table 15, “PWM Auto-Reload Timer Register Map and Re-

set Values,” on page 74

Changed title of Figure 123 on page 227 and Figure 124

Changed Table 36 on page 166

6

Changed MTIM timer value to 100h in section “b” on page 171

Changed text above Figure 98. on page 177 (15kHz instead of 20kHz and replaced fCPU =

4MHz by fMTC = 4MHz) and changed Figure 98 (15kHz instead of 20kHz)

Changed Figure 107. on page 188

Changed Figure 108. on page 189

Changed Figure 115 on page 197

Changed description of OO[5:0] bits in the MPHST register (section 10.6.13 on page 206)

Changed min and max values for RON in section 12.9.1 on page 266

Changed Figure 144 and Figure 145. on page 267 and notes

Added ST7FMC1K2T3 and ST7FMC1K6TC sales types (updated device summary on 1st

page and “Supported part numbers” on page 292)

Changed VIT- and VIT+ in section 12.3.2 on page 250

7

Removed note 1 in section 12.4.4 on page 253

Changed IINJ(PIN) in section 12.8.1 on page 263 and removed note 1 for VIL and VIH

Changed RON max in section 12.9.1 on page 266 and removed note 1 for VIL, VIH and RON

Removed subsection in Important Notes Section 14 : “Op-Amp input offset voltage”

Notes for Table in Section 12.13 updated, removing link to ”Op-Amp input offset voltage”

Flash memory data retention changed (first page and Section 12.6.2)

Removed references to true open drain I/Os.Updated Table 1 on page 12: replaced

MCZEM5) by MCZEM6), and replaced Port H0, Port H1, Port H2 and Port H3 respectively

by Port H4, Port H5, Port H6 and Port H7 (in the rows corresponding to PH4, PH5, PH6 and

PH7 in the “Pin name column”

Updated note 8 in Table 1 on page 12

Added section 5 on page 24

Added note to section 6.1 on page 28

Added note to section 6.2.1 on page 29 and updated Figure 15. on page 29

Changed section 10.5.5.2 on page 110 (when a character transmission is complete, etc.)

Modified Table 34 on page 161 (window and event filters column)

Replaced MISR register by MIMR register in the 3rd paragraph of “Switched Mode” on page

168

8

Removed caution and added notes 3 and 4 below Figure 93. on page 170 in section 10.6.7.2

on page 170

In section 10.6.6.11 on page 163 and in Figure 94 on page 172, replace “TES[1:0] = 00,01

or 10” by “TES[1:0] = 00,10 or 11”

Changed VIT+(AVD) min value in section 12.3.3 on page 250

Changed section 12.5.3 on page 256

Changed Is parameter description and note 4 in section 12.8.1 on page 263

Updated note 3 in section 12.8.1 on page 263

Added note to Figure 138. on page 264

Removed 32K ROM versions: changed “Supported part numbers” on page 290 and “ST7MC

MICROCONTROLLER OPTION LIST” on page 291

Changed “FLASH/FASTROM DEVICES ONLY” on page 297 (added table) and added “RE-

SET VALUE OF UNAVAILABLE PINS” on page 300

Modified section 15.5 on page 300

Added Important Notes subsection section 15.5 on page 300: “Injected Current On PD7”

307/309

Share Link: