STM32F030R6P6 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

STM32F030R6P6

Value-line ARM®-based 32-bit MCU with up to 256-KB Flash, timers, ADC, communication interfaces, 2.4-3.6 V operation

STMicroelectronics 

Electrical characteristics

STM32F030x4/x6/x8/xC

6.2

Absolute maximum ratings

Stresses above the absolute maximum ratings listed in Table 18: Voltage characteristics,

Table 19: Current characteristics and Table 20: Thermal characteristics may cause

permanent damage to the device. These are stress ratings only and functional operation of

the device at these conditions is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

Symbol

Table 18. Voltage characteristics(1)

Ratings

Min

Max

Unit

VDD–VSS

VDDA–VSS

VDD–VDDA

External main supply voltage

External analog supply voltage

Allowed voltage difference for VDD > VDDA

Input voltage on FT and FTf pins

VIN(2)

Input voltage on TTa pins

BOOT0

Input voltage on any other pin

|ΔVDDx| Variations between different VDD power pins

|VSSx −VSS|

Variations between all the different ground

pins

-0.3

-0.3

-

VSS −0.3

VSS −0.3

0

VSS −0.3

-

-

4.0

V

4.0

V

0.4

V

VDDIOx + 4.0 (3) V

4.0

V

VDDIOx + 4.0 (3) V

4.0

V

50

mV

50

mV

VESD(HBM)

Electrostatic discharge voltage

(human body model)

see Section 6.3.12: Electrical

sensitivity characteristics

-

1. All main power (VDD, VDDA) and ground (VSS, VSSA) pins must always be connected to the external power

supply, in the permitted range.

2. VIN maximum must always be respected. Refer to Table 19: Current characteristics for the maximum

allowed injected current values.

3. VDDIOx is internally connected with VDD pin.

42/91

DocID024849 Rev 3

Share Link: