STM32F051C6T7TR(2012) 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

STM32F051C6T7TR
(Rev.:2012)

Low- and medium-density advanced ARM™-based 32-bit MCU with 16 to 64 Kbytes Flash, timers, ADC, DAC and comm. interfaces

STMicroelectronics 

STM32F051x

Electrical characteristics

Low-speed external clock generated from a crystal resonator

The low-speed external (LSE) clock can be supplied with a 32.768 kHz crystal resonator

oscillator. All the information given in this paragraph are based on design simulation results

obtained with typical external components specified in Table 37. In the application, the

resonator and the load capacitors have to be placed as close as possible to the oscillator

pins in order to minimize output distortion and startup stabilization time. Refer to the crystal

resonator manufacturer for more details on the resonator characteristics (frequency,

package, accuracy).

Table 37. LSE oscillator characteristics (fLSE = 32.768 kHz)

Symbol

Parameter

Conditions(1)

Min(2) Typ Max(2) Unit

LSEDRV[1:0]=00

lower driving capability

- 0.5 0.9

IDD LSE current consumption

LSEDRV[1:0]= 01

medium low driving capability

LSEDRV[1:0] = 10

medium high driving capability

-

-

1

µA

-

-

1.3

LSEDRV[1:0]=11

higher driving capability

-

-

1.6

LSEDRV[1:0]=00

lower driving capability

5

-

-

gm

Oscillator

transconductance

LSEDRV[1:0]= 01

medium low driving capability

LSEDRV[1:0] = 10

medium high driving capability

8

-

15

-

-

µA/V

-

LSEDRV[1:0]=11

higher driving capability

25

-

-

tSU(LSE)(3) Startup time

VDD is stabilized

-

2

-

s

1. Refer to the note and caution paragraphs below the table, and to the application note AN2867 “Oscillator design guide for

ST microcontrollers”.

2. Guaranteed by design, not tested in production.

3. tSU(LSE) is the startup time measured from the moment it is enabled (by software) to a stabilized 32.768 kHz oscillation is

reached. This value is measured for a standard crystal and it can vary significantly with the crystal manufacturer

Note:

For information on selecting the crystal, refer to the application note AN2867 “Oscillator

design guide for ST microcontrollers” available from the ST website www.st.com.

Doc ID 022265 Rev 3

61/105

Share Link: