STM32F100C8H7BTR(2010) 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

STM32F100C8H7BTR
(Rev.:2010)

Low & medium-density value line, advanced ARM-based 32-bit MCU with 16 to 128 KB Flash, 12 timers, ADC, DAC & 8 comm interfaces

STMicroelectronics 

Description

STM32F100x4, STM32F100x6, STM32F100x8, STM32F100xB

Table 3. Timer feature comparison

Timer

Counter

resolution

Counter

type

Prescaler

factor

DMA request Capture/compare Complementary

generation

channels

outputs

Up, Any integer

TIM1 16-bit

down, between 1

Yes

4

Yes

up/down and 65536

TIM2,

Up, Any integer

TIM3, 16-bit

down, between 1

Yes

4

No

TIM4

up/down and 65536

Any integer

TIM15 16-bit

Up between 1

Yes

2

Yes

and 65536

TIM16,

TIM17

16-bit

Any integer

Up between 1

Yes

and 65536

1

Yes

TIM6,

TIM7

16-bit

Any integer

Up between 1

Yes

and 65536

0

No

2.16.1

2.16.2

Advanced-control timer (TIM1)

The advanced-control timer (TIM1) can be seen as a three-phase PWM multiplexed on 6

channels. It has complementary PWM outputs with programmable inserted dead times. It

can also be seen as a complete general-purpose timer. The 4 independent channels can be

used for:

● Input capture

● Output compare

● PWM generation (edge or center-aligned modes)

● One-pulse mode output

If configured as a standard 16-bit timer, it has the same features as the TIMx timer. If

configured as the 16-bit PWM generator, it has full modulation capability (0-100%).

The counter can be frozen in debug mode.

Many features are shared with those of the standard TIM timers which have the same

architecture. The advanced control timer can therefore work together with the TIM timers via

the Timer Link feature for synchronization or event chaining.

General-purpose timers (TIM2, TIM3, TIM4, TIM15, TIM16 & TIM17)

There are six synchronizable general-purpose timers embedded in the STM32F100xx

devices (see Table 3 for differences). Each general-purpose timers can be used to generate

PWM outputs, or as simple time base.

TIM2, TIM3, TIM4

STM32F100xx devices feature three synchronizable 4-channels general-purpose timers.

These timers are based on a 16-bit auto-reload up/downcounter and a 16-bit prescaler.

They feature 4 independent channels each for input capture/output compare, PWM or one-

18/84

Doc ID 16455 Rev 2

Share Link: