AR1010T-I/ML(2016) 查看數據表（PDF） - Microchip Technology

零件编号

产品描述 (功能)

生产厂家

AR1010T-I/ML
(Rev.:2016)

AR1000 Series Resistive Touch Screen Controller

Microchip Technology 

AR1000 SERIES RESISTIVE TOUCH SCREEN CONTROLLER

4.8 Touch Report Protocol

Touch coordinates, when available, are provided to the

master by the AR1021 in the following protocol (See

Figure 4-3).

FIGURE 4-3:

I2C TOUCH REPORT PROTOCOL

Note that the IRQ signal shown above occurs on the

SDO pin of the AR1021.

4.9 Command Protocol

The master issues supported commands to the

AR1021 in the following protocol.

Below is an example of the ENABLE_TOUCH command

(see Figure 4-4).

FIGURE 4-4:

I2C COMMAND PROTOCOL

Note that the IRQ shown above occurs on the SDO pin.

• 0x9A

• 0x00

• 0x55

• 0x01

• 0x12

AR1021 Device ID address

Protocol command byte (send 0x00 for

the protocol command register)

Header

Data size

Command

4.10 Sleep State

Pending communications are not maintained through a

sleep/wake cycle.

If the SDO pin is asserted for a pending touch report or

command response, and the AR1021 enters a Sleep

state, prior to the master performing a read on the data,

then the data is lost.

 2009-2016 Microchip Technology Inc.

DS40001393C-page 17

Share Link: