STM32L152CCU7D 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

STM32L152CCU7D

Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3, 256KB Flash, 32KB SRAM, 8KB EEPROM, LCD, USB, ADC, DAC

STMicroelectronics 

Functional overview

STM32L151xC STM32L152xC

3.10.1

3.10.2

Temperature sensor

The temperature sensor (TS) generates a voltage VSENSE that varies linearly with

temperature.

The temperature sensor is internally connected to the ADC_IN16 input channel which is

used to convert the sensor output voltage into a digital value.

The sensor provides good linearity but it has to be calibrated to obtain good overall

accuracy of the temperature measurement. As the offset of the temperature sensor varies

from chip to chip due to process variation, the uncalibrated internal temperature sensor is

suitable for applications that detect temperature changes only.

To improve the accuracy of the temperature sensor measurement, each device is

individually factory-calibrated by ST. The temperature sensor factory calibration data are

stored by ST in the system memory area, accessible in read-only mode. See Table 61:

Temperature sensor calibration values.

Internal voltage reference (VREFINT)

The internal voltage reference (VREFINT) provides a stable (bandgap) voltage output for the

ADC and Comparators. VREFINT is internally connected to the ADC_IN17 input channel. It

enables accurate monitoring of the VDD value (when no external voltage, VREF+, is

available for ADC). The precise voltage of VREFINT is individually measured for each part by

ST during production test and stored in the system memory area. It is accessible in read-

only mode. See Table 16: Embedded internal reference voltage calibration values.

3.11

DAC (digital-to-analog converter)

The two 12-bit buffered DAC channels can be used to convert two digital signals into two

analog voltage signal outputs. The chosen design structure is composed of integrated

resistor strings and an amplifier in non-inverting configuration.

This dual digital Interface supports the following features:

• Two DAC converters: one for each output channel

• 8-bit or 12-bit monotonic output

• Left or right data alignment in 12-bit mode

• Synchronized update capability

• Noise-wave generation

• Triangular-wave generation

• Dual DAC channels, independent or simultaneous conversions

• DMA capability for each channel (including the underrun interrupt)

• External triggers for conversion

• Input reference voltage VREF+

Eight DAC trigger inputs are used in the STM32L151xC and STM32L152xC devices. The

DAC channels are triggered through the timer update outputs that are also connected to

different DMA channels.

26/136

DocID022799 Rev 13

Share Link: