STM32L151RCU7 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

STM32L151RCU7

Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3, 256KB Flash, 32KB SRAM, 8KB EEPROM, LCD, USB, ADC, DAC

STMicroelectronics 

Functional overview

STM32L151xC STM32L152xC

introduced by the finger (or any conductive object) is measured using a proven

implementation based on a surface charge transfer acquisition principle. It consists of

charging the sensor capacitance and then transferring a part of the accumulated charges

into a sampling capacitor until the voltage across this capacitor has reached a specific

threshold. The capacitive sensing acquisition only requires few external components to

operate. This acquisition is managed directly by the GPIOs, timers and analog I/O groups

(see Section 3.14: System configuration controller and routing interface).

Reliable touch sensing functionality can be quickly and easily implemented using the free

STM32L1xx STMTouch touch sensing firmware library.

3.16

Timers and watchdogs

The ultra-low-power STM32L151xC and STM32L152xC devices include seven general-

purpose timers, two basic timers, and two watchdog timers.

Table 7 compares the features of the general-purpose and basic timers.

Table 7. Timer feature comparison

Timer

Counter

resolution

Counter type

Prescaler factor

DMA

request

generation

Capture/compare

channels

Complementary

outputs

TIM2,

TIM3,

TIM4

16-bit

Up, down,

up/down

Any integer between

1 and 65536

Yes

4

No

TIM5 32-bit

Up, down,

up/down

Any integer between

1 and 65536

Yes

4

No

TIM9 16-bit

Up, down,

up/down

Any integer between

1 and 65536

No

2

No

TIM10,

TIM11

16-bit

Up

Any integer between

1 and 65536

No

1

No

TIM6,

TIM7

16-bit

Up

Any integer between

1 and 65536

Yes

0

No

3.16.1

General-purpose timers (TIM2, TIM3, TIM4, TIM5, TIM9, TIM10 and

TIM11)

There are seven synchronizable general-purpose timers embedded in the STM32L151xC

and STM32L152xC devices (see Table 7 for differences).

TIM2, TIM3, TIM4, TIM5

TIM2, TIM3, TIM4 are based on 16-bit auto-reload up/down counter. TIM5 is based on a 32-

bit auto-reload up/down counter. They include a 16-bit prescaler. They feature four

independent channels each for input capture/output compare, PWM or one-pulse mode

output. This gives up to 16 input captures/output compares/PWMs on the largest packages.

TIM2, TIM3, TIM4, TIM5 general-purpose timers can work together or with the TIM10,

TIM11 and TIM9 general-purpose timers via the Timer Link feature for synchronization or

event chaining. Their counter can be frozen in debug mode. Any of the general-purpose

timers can be used to generate PWM outputs.

28/136

DocID022799 Rev 13

Share Link: