Electrical characteristics
STM32F37xxx
Caution:
Each power supply pair (VDD/VSS, VDDA/VSSA etc..) must be decoupled with filtering
ceramic capacitors as shown above. These capacitors must be placed as close as possible
to, or below, the appropriate pins on the underside of the PCB to ensure the good
functionality of the device.
6.1.7 Current consumption measurement
Figure 10. Current consumption measurement scheme
IDD_VBAT
VBAT
IDD
VDD
IDDA
VDDA
IDDSD12
VDDSD12
IDDSD3
VDDSD3
MS19233V1
54/131
DocID022691 Rev 4