STM32L152C8H6(2013) 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

STM32L152C8H6
(Rev.:2013)

Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3, 128KB Flash, 16KB SRAM, 4KB EEPROM, LCD, USB, ADC, DAC

STMicroelectronics 

Electrical characteristics

STM32L151x6/8/B, STM32L152x6/8/B

Designing hardened software to avoid noise problems

EMC characterization and optimization are performed at component level with a typical

application environment and simplified MCU software. It should be noted that good EMC

performance is highly dependent on the user application and the software in particular.

Therefore it is recommended that the user applies EMC software optimization and

prequalification tests in relation with the EMC level requested for his application.

Software recommendations

The software flowchart must include the management of runaway conditions such as:

● Corrupted program counter

● Unexpected reset

● Critical data corruption (control registers...)

Prequalification trials

Most of the common failures (unexpected reset and program counter corruption) can be

reproduced by manually forcing a low state on the NRST pin or the oscillator pins for 1

second.

To complete these trials, ESD stress can be applied directly on the device, over the range of

specification values. When unexpected behavior is detected, the software can be hardened

to prevent unrecoverable errors occurring (see application note AN1015).

Electromagnetic Interference (EMI)

The electromagnetic field emitted by the device are monitored while a simple application is

executed (toggling 2 LEDs through the I/O ports). This emission test is compliant with

IEC 61967-2 standard which specifies the test board and the pin loading.

Table 38. EMI characteristics

Max vs. frequency range

Symbol Parameter Conditions

Monitored

frequency band

4 MHz 16 MHz 32 MHz

voltage voltage voltage

Unit

range 3 range 2 range 1

VDD = 3.3 V,

0.1 to 30 MHz

3

-6

-5

TA = 25 °C,

30 to 130 MHz

18

4

-7 dBµV

SEMI Peak level LQFP100 package

compliant with IEC 130 MHz to 1GHz 15

5

-7

61967-2

SAE EMI Level

2.5

2

1

-

76/121

Doc ID 17659 Rev 8

Share Link: