STM32F301R6Y6 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

STM32F301R6Y6

ARM® Cortex®-M4 32-bit MCU+FPU, up to 64 KB Flash, 16 KB SRAM, ADC, DAC, COMP, Op-Amp, 2.0 – 3.6 V

STMicroelectronics 

Electrical characteristics

STM32F301x6 STM32F301x8

Table 21. Current characteristics

Symbol

Ratings

Max.

Unit

ΣIVDD

Total current into sum of all VDD_x power lines (source)

130

ΣIVSS

IVDD

IVSS

Total current out of sum of all VSS_x ground lines (sink)

Maximum current into each VDD_x power line (source)(1)

Maximum current out of each VSS _x ground line (sink)(1)

-130

100

-100

IIO(PIN)

ΣIIO(PIN)

Output current sunk by any I/O and control pin

Output current sourced by any I/O and control pin

Total output current sunk by sum of all IOs and control pins(2)

Total output current sourced by sum of all IOs and control pins(2)

25

-25

mA

80

-80

Injected current on TT, FT, FTf and B pins(3)

-5/+0

IINJ(PIN)

Injected current on TC and RST pin(4)

+/-5

Injected current on TTa pins(5)

+/-5

ΣIINJ(PIN)

Total injected current (sum of all I/O and control pins)(6)

+/-25

1. pAellrmmaititnedporawnegre(.VDD, VDDA) and ground (VSS and VSSA) pins must always be connected to the external power supply, in the

2. This current consumption must be correctly distributed over all I/Os and control pins.The total output current must not be

sunk/sourced between two consecutive power supply pins referring to high pin count LQFP packages.

3. Positive injection is not possible on these I/Os and does not occur for input voltages lower than the specified maximum

value.

4.

A positive injection

exceeded. Refer to

iTsainbdleu2ce0d: VboyltVagINe>chVaDrDacwtehriilsetiacsnefogratthiveeminajexicmtiounmisalilnodwuecdedinpbuytVvIoNl<taVgeSSv.aIlIuNeJ(sP.IN)

must

never

be

5. edAxispctouesrebidtsievtdeh.einRjaeenfceatirlooanglsipsoeitnrofdoTuramcbealdencb2ey0:oVVfINothl>teaVgdeDevDciAhcaewr.ahScileeteearinsnotietcegsa(f2toi)vrbetehilenojwemcaTtixaoibnmleiusm6in6a.dlulocweeddbiynpVuINt <voVltSaSg.eIIvNaJl(uPeINs.)Nmeugsattinveevienrjebcetion

6.

When several inputs are submitted to a current injection,

negative injected currents (instantaneous values).

the

maximum

ΣIINJ(PIN)

is

the

absolute

sum

of

the

positive

and

Symbol

TSTG

TJ

Table 22. Thermal characteristics

Ratings

Storage temperature range

Maximum junction temperature

Value

Unit

–65 to +150 °C

150

°C

56/135

DocID025146 Rev 6

Share Link: