STM32F031K6T7(2015) 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

STM32F031K6T7
(Rev.:2015)

ARM®-based 32-bit MCU with up to 32 Kbyte Flash, 9 timers, ADC and communication interfaces, 2.0 - 3.6 V

STMicroelectronics 

STM32F031x4 STM32F031x6

Electrical characteristics

Output driving current

The GPIOs (general purpose input/outputs) can sink or source up to +/-8 mA, and sink or

source up to +/- 20 mA (with a relaxed VOL/VOH).

In the user application, the number of I/O pins which can drive current must be limited to

respect the absolute maximum rating specified in Section 6.2:

• The sum of the currents sourced by all the I/Os on VDDIOx, plus the maximum

consumption of the MCU sourced on VDD, cannot exceed the absolute maximum rating

ΣIVDD (see Table 15: Voltage characteristics).

• The sum of the currents sunk by all the I/Os on VSS, plus the maximum consumption of

the MCU sunk on VSS, cannot exceed the absolute maximum rating ΣIVSS (see

Table 15: Voltage characteristics).

Output voltage levels

Unless otherwise specified, the parameters given in the table below are derived from tests

performed under the ambient temperature and supply voltage conditions summarized in

Table 18: General operating conditions. All I/Os are CMOS- and TTL-compliant (FT, TTa or

TC unless otherwise specified).

Table 47. Output voltage characteristics(1)

Symbol

Parameter

Conditions

Min

Max Unit

VOL

VOH

VOL

VOH

VOL(3)

VOH(3)

VOL(3)

VOH(3)

Output low level voltage for an I/O pin

Output high level voltage for an I/O pin

Output low level voltage for an I/O pin

Output high level voltage for an I/O pin

Output low level voltage for an I/O pin

Output high level voltage for an I/O pin

Output low level voltage for an I/O pin

Output high level voltage for an I/O pin

CMOS port(2)

|IIO| = 8 mA

VDDIOx ≥ 2.7 V

TTL port(2)

|IIO| = 8 mA

VDDIOx ≥ 2.7 V

|IIO| = 20 mA

VDDIOx ≥ 2.7 V

|IIO| = 6 mA

-

0.4

V

VDDIOx–0.4

-

-

0.4

V

2.4

-

-

1.3

V

VDDIOx–1.3

-

-

0.4

V

VDDIOx–0.4

-

VOLFm+(3)

Output low level voltage for an FTf I/O pin in

Fm+ mode

|IIO| = 20 mA

VDDIOx ≥ 2.7 V

|IIO| = 10 mA

-

0.4 V

-

0.4 V

1.

TVhoeltaIgIOe

respect

current sourced or sunk by the

characteristics, and the sum of

the absolute maximum ratings

device must

ΣthIeIOc.urrents

always respect the

sourced or sunk by

absolute maximum rating

all the I/Os (I/O ports and

specified in Table

control pins) must

15:

always

2. TTL and CMOS outputs are compatible with JEDEC standards JESD36 and JESD52.

3. Data based on characterization results. Not tested in production.

DocID025743 Rev 4

67/106

80

Share Link: