TS921IPT(2012) 查看數據表（PDF） - STMicroelectronics
零件编号
产品描述 (功能)
生产厂家
TS921IPT Datasheet PDF : 16 Pages
| |||
TS921
Absolute maximum ratings
2
Absolute maximum ratings
Table 2. Key parameters and their absolute maximum ratings
Symbol
Parameter
Condition
Value
Unit
VCC
Vid
Vi
Tstg
Tj
Rthja
Supply voltage(1)
Differential input voltage(2)
Input voltage
Storage temperature
Maximum junction temperature
Thermal resistance junction-to-ambient
SO-8
TSSOP8
DIP8
14
±1
VDD - 0.3 to VCC + 0.3
-65 to +150
150
125
120
85
V
V
V
°C
°C
°C/W
Rthjc Thermal resistance junction-to-case
SO-8
TSSOP8
DIP8
40
37
°C/W
41
HBM
Human body model(3)
1.5
kV
ESD Electrostatic discharge
MM
Machine model(4)
100
V
Output short-circuit duration
CDM
Charged device model
1.5
kV
See(5)
Latch-up immunity
200
mA
Soldering temperature
10 sec.,
standard package
10 sec.,
lead-free package
250
°C
260
1. All voltage values, except differential voltage are with respect to network ground terminal.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. If Vid > ±1 V, the
maximum input current must not exceed ±1 mA. In this case (Vid > ±1 V) an input serie resistor must be added to limit input
current.
3. Human body model, 100 pF discharged through a 1.5 kΩ resistor into pin of device.
4. Machine model ESD, a 200 pF cap is charged to the specified voltage, then discharged directly into the IC with no external
series resistor (internal resistor < 5 Ω), into pin to pin of device.
5. There is no short-circuit protection inside the device: short-circuits from the output to VCC can cause excessive heating. The
maximum output current is approximately 80 mA, independent of the magnitude of VCC. Destructive dissipation can result
from simultaneous short-circuits on all amplifiers.
Table 3. Operating conditions
Symbol
Parameter
VCC
Vicm
Toper
Supply voltage
Common mode input voltage range
Operating free air temperature range
Value
2.7 to 12
VDD - 0.2 to VCC + 0.2
-40 to +125
Unit
V
V
°C
Doc ID 5560 Rev 4
3/16
Share Link: 