STPCC03 View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STPCC03

PC Compatible Embeded Microprocessor

STMicroelectronics 

STRAP OPTIONS

3.1.3 486 CLOCK PROGRAMMING (486_CLK)

The bit MD[40] is used to set the clock multiplication factor of the 486 core. With the MD[40] pin pulled low

the 486 will run in DX (x1) mode, while with the MD[40] pin pulled high the 486 will run in DX2 (x2) mode.

The default value of the resistor on this strap input should be a resister to gnd (DX mode).

Strap Options [43:41] and [39:27] are reserved.

Release B

This is preliminary information on a new product now in developement. Details are subject to change without notice

27/51

Share Link: