EVAL-ADG902EB(RevA) View Datasheet(PDF) - Analog Devices

Part Name

Description

Manufacturer

EVAL-ADG902EB
(Rev.:RevA)

Wideband, 40 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, SPST Switches

Analog Devices 

ADG901/ADG902

TERMINOLOGY

Parameter

Description

VDD

IDD

GND

Most positive power supply potential.

Positive supply current.

Ground (0 V) reference.

CTRL

Logic control input.

VINL

VINH

IINL (IINH)

CIN

tON

tOFF

tRISE

tFALL

Off Isolation

Maximum input voltage for Logic 0.

Minimum input voltage for Logic 1.

Input current of the digital input.

Digital input capacitance.

Delay between applying the digital control input and the output switching on.

Delay between applying the digital control input and the output switching off.

Rise time. Time for the RF signal to rise from 10% to 90% of the ON level.

Fall time. Time for the RF signal to fall from 90% to 10% of the ON level.

The attenuation between input and output ports of the switch when the switch control voltage is in the

OFF condition.

Insertion Loss

The attenuation between input and output ports of the switch when the switch control voltage is in the

ON condition.

P–1 dB

1 dB compression point. The RF input power level at which the switch insertion loss increases by 1 dB over its

low level value. It is a measure of how much power the ON switch can handle before the insertion loss increases

by 1 dB.

IP3

Third order intermodulation intercept. This is a measure of the power in false tones that occur when closely spaced

tones are passed through a switch, whereby the nonlinearity of the switch causes these false tones to be generated.

Return Loss

The amount of reflected power relative to the incident power at a port. Large return loss indicates good matching.

By measuring Return Loss the VSWR can be calculated from conversion charts. VSWR (voltage standing wave ratio)

indicates degree of matching present at a switch RF port.

Video Feedthrough Spurious signals present at the RF ports of the switch when the control voltage is switched from high to low

or low to high without an RF signal present.

–4–

REV. A

Share Link: