ML2264CCP View Datasheet(PDF) - Micro Linear Corporation
Part Name
Description
Manufacturer
ML2264CCP Datasheet PDF : 17 Pages
| |||
ML2264
ELECTRICAL CHARACTERISTICS (Continued)
Unless otherwise specified, TA = TMIN to TMAX, VCC = +VREF = 5V ± 5%, and –VREF = GND, and timing measured at 1.4V,
CL = 100pF. (Note 1)
ML2264XCX
PARAMETER
NOTES
CONDITIONS
TYP
MIN (NOTE 3) MAX
UNITS
Digital and DC (Continued)
VOUT(1), Logical “1”
Output Voltage
4
IOUT = –2mA
4.0
V
VOUT(0), Logical “0”
Output Voltage
4
IOUT = 2mA
0.4
V
IOUT, Three-State Output
Current
COUT, Logic Output
Capacitance
4
VOUT = 0V
VOUT = VCC
–1
µA
1µA
5
pF
CIN, Logic Input
Capacitance
ICC, Supply Current
4 CS = WR = RD = “1”,
No Output Load
5
pF
18
mA
AC and Dynamic Performance (Note 9)
tCRD, Conversion Time,
Read Mode
4 RD to INT, MODE = 0V
tCWR-RD, Conversion Time,
Write-Read Mode
4, 8 WR Falling
Edge to INT,
tRD < tINT,
MODE = VCC
SH/TH = VCC
SH/TH = GND
SNR, Signal to Noise Ratio
VIN = 5V, 250kHz
Noise is sum of all nonfundamental
components from 0–500kHz.
SH/TH = VCC, MODE = VCC
fSAMPLING = 1.0 MHz
HD, Harmonic Distortion
VIN = 5V, 250kHz
THD is sum of 2–5th harmonics relative to
fundamental.
SH/TH = VCC, MODE = VCC
fSAMPLING = 1.0 MHz
IMD, Intermodulation Distortion
fa = 2.5V, 250kHz
fb = 2.5V, 248kHz
IMB is (fa + fb), (fa – fb), (2fa + fb), (2fa – fb),
(fa + 2fb), or (fa – 2fb) relative to fundamental.
SH/TH = VCC, MODE = VCC
fSAMPLING = 1.0 MHz
FR, Frequency Response
SR, Slew Rate Tracking
VIN = 5V, 0–250kHz Relative to 1kHz
SH/TH = VCC, MODE = VCC
fSAMPLING = 1.0 MHz
5
SH/TH = VCC
SH/TH = GND
tAS, Multiplexer Address
4 SH/TH = GND, Figure 1
0
Setup Time
(Track & Hold Operation)
1020
ns
700
ns
830
ns
48
dB
–63
dB
–60
dB
±0.1
dB
4.0
V/µs
0.25
V/µs
ns
4
Share Link: 