LIS331HHTR View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

LIS331HHTR

MEMS digital output motion sensor ultra low-power high full-scale 3-axes “nano” accelerometer

STMicroelectronics 

Register description

7.10

OUT_Y_L (2Ah), OUT_Y_H (2Bh)

Y-axis acceleration data. The value is expressed as two’s complement.

LIS331HH

7.11

OUT_Z_L (2Ch), OUT_Z_H (2Dh)

Z-axis acceleration data. The value is expressed as two’s complement.

7.12

INT1_CFG (30h)

Table 36. INT1_CFG register

AOI

6D

ZHIE

ZLIE

YHIE

YLIE

XHIE

XLIE

Table 37.

AOI

6D

ZHIE

ZLIE

YHIE

YLIE

XHIE

XLIE

INT1_CFG description

AND/OR combination of Interrupt events. Default value: 0.

(See Table 38)

6 direction detection function enable. Default value: 0.

(See Table 38)

Enable interrupt generation on Z high event. Default value: 0

(0: disable interrupt request;

1: enable interrupt request on measured accel. value higher than preset threshold)

Enable interrupt generation on Z low event. Default value: 0

(0: disable interrupt request;

1: enable interrupt request on measured accel. value lower than preset threshold)

Enable interrupt generation on Y high event. Default value: 0

(0: disable interrupt request;

1: enable interrupt request on measured accel. value higher than preset threshold)

Enable interrupt generation on Y low event. Default value: 0

(0: disable interrupt request;

1: enable interrupt request on measured accel. value lower than preset threshold)

Enable interrupt generation on X high event. Default value: 0

(0: disable interrupt request;

1: enable interrupt request on measured accel. value higher than preset threshold)

Enable interrupt generation on X low event. Default value: 0

(0: disable interrupt request;

1: enable interrupt request on measured accel. value lower than preset threshold)

Configuration register for Interrupt 1 source.

30/37

Doc ID 16366 Rev 1

Share Link: