M24M01-RMN6G View Datasheet(PDF) - STMicroelectronics
Part Name
Description
Manufacturer
M24M01-RMN6G Datasheet PDF : 37 Pages
| |||
DC and AC parameters
M24M01-R, M24M01-W, M24M01-HR
Table 11. DC characteristics (M24M01-R and M24M01-HR)
Symbol
Parameter
Test condition (in addition to
those in Table 7)
Min.
Max. Unit
ILI
Input leakage current
(E1, E2, SCL, SDA)
VIN = VSS or VCC
device in Standby mode
±2
µA
ILO Output leakage current
SDA in Hi-Z, external voltage
applied on SDA: VSS or VCC
VCC = 1.8 V, fc= 400 kHz
(rise/fall time < 50 ns)
±2
µA
0.8
mA
ICC Supply current (Read)
VCC = 2.5 V, fc= 400 kHz
(rise/fall time < 50 ns)
VCC = 5.5 V, fc= 400 kHz
(rise/fall time < 50 ns)
1
mA
2
mA
1.8 V < VCC < 5.5 V, fc= 1 MHz
(rise/fall time < 50 ns)
2.5
mA
ICC0(1) Supply current (Write)
ICC1 Standby supply current
During tW, 1.8V < VCC < 5.5V
Device not selected(2),
VIN = VSS or VCC,
VCC = 1.8 V
Device not selected(2),
VIN = VSS or VCC,
VCC = 2.5 V
Device not selected(2),
VIN = VSS or VCC,
VCC = 5.5 V
5
mA
1
µA
2
µA
3
µA
VIL
Input low voltage
(SCL, SDA, WC)
1.8 V ≤ VCC < 2.5 V
2.5 V ≤ VCC ≤ 5.5 V
–0.45 0.25 VCC V
–0.45 0.3 VCC
VIH
Input high voltage
(SCL, SDA, WC)
1.8 V ≤ VCC < 2.5 V
2.5 V ≤ VCC ≤ 5.5 V
0.75VCC VCC+1 V
0.7VCC VCC+1
IOL = 1.0 mA, VCC = 1.8 V
0.2
V
VOL Output low voltage
IOL = 2.1 mA, VCC = 2.5 V
0.4
V
IOL = 3.0 mA, VCC = 5.5 V
0.4
V
1. Characterized value, not tested in production.
2. The device is not selected after a power-up, a Read instruction (after the Stop condition), or after the
completion of an internal write cycle tW (tW is triggered by the correct decoding of a Write instruction).
22/37
Doc ID 12943 Rev 7
Share Link: 