M25P10-AVMP6GX View Datasheet(PDF) - Numonyx -> Micron
Part Name
Description
Manufacturer
M25P10-AVMP6GX Datasheet PDF : 51 Pages
| |||
DC and AC parameters
10 DC and AC parameters
M25P10-A
This section summarizes the operating and measurement conditions, and the DC and AC
characteristics of the device. The parameters in the DC and AC characteristic tables that
follow are derived from tests performed under the measurement conditions summarized in
the relevant tables. Designers should check that the operating conditions in their circuit
match the measurement conditions when relying on the quoted parameters.
Table 10. Operating conditions
Symbol
Parameter
VCC Supply voltage
Ambient operating temperature (device grade 6)
TA
Ambient operating temperature (device grade 3)
Min
2.3(1)
–40
–40
Max
Unit
3.6
V
85
°C
125
1. Only in products with process technology code Y. In products with process technology code X, Vcc(min) is
2.7 V.
Table 11. Data retention and endurance
Parameter
Condition
Min
Max
Unit
Erase/Program
cycles
Data retention
Device grade 6
Device grade 3
at 55 °C
100,000
cycles per sector
10,000
20
years
Table 12. AC measurement conditions
Symbol
Parameter
Min
Max
Unit
CL
Load capacitance
Input rise and fall times
30
pF
5
ns
Input pulse voltages
Input timing reference voltages
Output timing reference voltages
0.2VCC to 0.8VCC
V
0.3VCC to 0.7VCC
V
VCC / 2
V
1. Output Hi-Z is defined as the point where data out is no longer driven.
Figure 21. AC measurement I/O waveform
Input levels
0.8VCC
0.2VCC
Input and output
timing reference levels
0.7VCC
0.5VCC
0.3VCC
AI07455
36/51
Share Link: 