MB90P663APFM View Datasheet(PDF) - Fujitsu
Part Name
Description
Manufacturer
MB90P663APFM Datasheet PDF : 84 Pages
| |||
MB90660A Series
s PRODUCT LINEUP
Part number
Parameter
MB90P663A
MB90662A
MB90663A
Classification
OTPROM
MASK ROM
MASK ROM
ROM size
48 Kbytes
32 Kbytes
48 Kbytes
RAM size
2 Kbytes
1.64 Kbytes
2 Kbytes
CPU functions
Number of basic instructions
Instruction bit length
Instruction length
Data bit length
Minimum execution time
Interrupt processing time
: 340
: 8/16 bits
: 1 to 7 bytes
: 1, 4, 8, 16, or 32 bits
: 62.5 ns/4 MHz (PLL 4 multiply)
: 1000 ns/16 MHz (minimum)
Ports
Input Ports
:4
I/O ports (CMOS)
: 39
I/O ports (N channel open-drain) : 8
Total
: 51
Packages
DIP-64P-M01
FPT-64P-M09
DIP-64P-M01
FPT-64P-M09
DIP-64P-M01
FPT-64P-M09
Multi-Function
Timer
14-bit up/down count timer × 1, buffered compare register × 4, buffered compare clear
register, zero detect terminal control, 4 output channels, non-overlapped 3-phase waveform
output, 3-phase independent dead time timer, 4-bit carrier counter
UART
Full duplex double buffer
Selectable clock synchronous/asynchronous operation
Built-in dedicated baud rate generator (During asynchronous operation: 62500, 31250,
19230, 9615, 4808, 2404, 1202 bps)
A/D Converter
10-bit precision × 8 channels
A/D conversion time
Startup trigger
Activiation
: 6.13 µs (98 machine cycles at 16 MHz machine clock,
includes sample hold time)
: Startup by software, external source, or multi-function
timer output (RT0) can be selected
: Single, scan (multiple channel continuous), continuous
(1 channel continuous), stop (synchronized with
conversion start in scan mode)
16-Bit Reload
Timer
16-bit reload timer operation (toggle output, one-shot output selectable)
(Count clock can be selected from 0.125 µs, 0.5 µs, or 2.0 µs at 16 MHz machine cycle)
Event count function selectable
4 channels built-in
8-Bit PWM
8-bit resolution PWM operation (arbitrary cycle: duty ratio pulse output)
(Count clock can be selected from 0.125 µs or 64.0 µs at 16 MHz machine cycle)
External Interrupts Number of inputs: 8
External interrupt mode (Interrupts can be generated by four types of request detect
sources)
PLL Function
1/2/3/4-time multiplier can be selected (Please set so as not to exceed guaranteed
operation frequency)
Miscellaneous
VPP is shared with MD2
Items
terminal (when writing the
—
—
EPROM)
3
Share Link: 