MB90P663APFM View Datasheet(PDF) - Fujitsu

Part Name

Description

Manufacturer

MB90P663APFM

16-bit Proprietary Microcontroller

Fujitsu 

MB90660A Series

s PIN DESCRIPTION

Pin no.

SH-DIP*1 LQFP*2

Pin name

30

22 X0

31

23 X1

33 to 40 25 to 32 P00 to P07

41 to 48 33 to 40 P10 to P17

49 to 52 41 to 44 P20 to P23

53 to 56 45 to 48 P24 to P27

TIM0 to TIM3

INT4 to INT7

22 to 25 14 to 17 P30 to P33

3

59 P40

SIN

4

60 P41

SOT

*1: DIP-64P-M01

*2: FPT-64P-M09

Circuit

type

Function

A Crystal oscillator pin (32 MHz).

(Oscillator)

B General-purpose I/O ports.

(CMOS)

B General-purpose I/O ports.

(CMOS)

B General-purpose I/O ports.

(CMOS)

G General-purpose I/O ports.

(CMOS) This function is activated when the output specification of the

reload timer is “disabled”.

I/O pins for reload timers 0 to 4.

Input is used only as necessary while serving as input for the

reload timer. It is therefore necessary to stop output

beforehand using other functions unless intentionally used

otherwise.

Their function as output terminals for the reload timer is

activated when the output specification is “enabled”.

External interrupt request input pins.

Input is used only as necessary while external interrupts are

enabled. It is therefore necessary to stop output beforehand

using other functions unless intentionally used otherwise.

B General-purpose I/O ports.

(CMOS)

E General-purpose I/O port.

(CMOS/H) This function is always enabled.

UART serial data input pin.

Input is used only as necessary while serving as UART input.

It is therefore necessary to stop output beforehand using other

functions unless intentionally used otherwise.

E General-purpose I/O port.

(CMOS/H) This function is activated when the serial data output

specification of the UART is “disabled”.

UART serial data output pin.

This function is activated when the serial data output

specification of the UART is “enabled”.

(Continued)

6

Share Link: