MCP4262T-503E/ML View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
MCP4262T-503E/ML Datasheet PDF : 88 Pages
| |||
MCP413X/415X/423X/425X
AC/DC CHARACTERISTICS (CONTINUED)
DC Characteristics
Standard Operating Conditions (unless otherwise specified)
Operating Temperature
–40°C ≤ TA ≤ +125°C (extended)
All parameters apply across the specified operating ranges unless noted.
VDD = +2.7V to 5.5V, 5 kΩ, 10 kΩ, 50 kΩ, 100 kΩ devices.
Typical specifications represent values for VDD = 5.5V, TA = +25°C.
Parameters
Sym
Min
Typ Max Units
Conditions
Power Requirements
Power Supply
Sensitivity
(MCP41X2 and
MCP42X2 only)
PSS
—
0.0015 0.0035 %/% 8-bit VDD = 2.7V to 5.5V,
VA = 2.7V, Code = 80h
—
0.0015 0.0035 %/% 7-bit VDD = 2.7V to 5.5V,
VA = 2.7V, Code = 40h
Note 1: Resistance is defined as the resistance between terminal A to terminal B.
2: INL and DNL are measured at VW with VA = VDD and VB = VSS.
3: MCP4XX1 only.
4: MCP4XX2 only, includes VWZSE and VWFSE.
5: Resistor terminals A, W and B’s polarity with respect to each other is not restricted.
6: This specification by design.
7: Non-linearity is affected by wiper resistance (RW), which changes significantly over voltage and
temperature.
8: The MCP4XX1 is externally connected to match the configurations of the MCP41X2 and MCP42X2, and
then tested.
9: POR/BOR is not rate dependent.
10: Supply current is independent of current through the resistor network.
DS22060B-page 10
© 2008 Microchip Technology Inc.
Share Link: 