PIC16C432
REGISTER 5-1:
LININTF REGISTER (ADDRESS: 90h)
U-0
U-0
U-0
U-0
—
—
—
—
bit 7
U-0
R/W-1
U-0
R/W-1
—
LINTX
—
LINVDD
bit 0
bit 7-3
Unimplemented: Read as '0'
bit 2
LINTX: LIN Bus Transmit bit
1 = LIN Bus line is high
0 = LIN Bus line is low
bit 1
Unimplemented: Read as '0'
bit 0
LINVDD: LIN Bus Transceiver VDD Supply bit
1 = VDD is supplied to the LIN Bus transceiver via microcontroller
0 = VDD is not supplied to the LIN Bus transceiver
Note 1: Transceiver VDD is same as microcontroller VDD.
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
’1’ = Bit is set
U = Unimplemented bit, read as ‘0’
’0’ = Bit is cleared x = Bit is unknown
TABLE 5-1: SUMMARY OF REGISTERS ASSOCIATED WITH LIN TRANSCEIVER
Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2
Bit 1
Bit 0
Value on
POR
Value on
All Other
RESETS
05h
PORTA —
—
—
RA4
RA3
RA2
LINRX
RA0 ---x 0000 ---u 0000
85h
TRISA
—
—
— TRISA4 TRISA3 TRISA2 TLINRX(2) TRISA0 ---1 1111 ---1 1111
90h
LININTF —
—
—
—
—
LINTX
—
LINVDD ---- -1-1 ---- -1-1
Legend: x = unknown, u = unchanged, — = Unimplemented locations read as ‘0’.
Note 1: Shaded bits are not used by LIN transceiver
2: TLINRX must be set to ‘1’ at all times.
DS41140C-page 26
Preliminary
2000-2013 Microchip Technology Inc.