PIC16F723AT-I/SP View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
PIC16F723AT-I/SP Datasheet PDF : 284 Pages
| |||
PIC16F/LF722A/723A
TABLE 23-5: TIMER0 AND TIMER1 EXTERNAL CLOCK REQUIREMENTS
Standard Operating Conditions (unless otherwise stated)
Operating Temperature -40°C TA +125°C
Param
No.
Sym.
Characteristic
Min.
Typ† Max. Units
Conditions
40* TT0H
T0CKI High Pulse Width No Prescaler 0.5 TCY + 20 —
—
ns
With Prescaler
10
—
—
ns
41* TT0L
T0CKI Low Pulse Width No Prescaler 0.5 TCY + 20 —
—
ns
With Prescaler
10
—
—
ns
42* TT0P
T0CKI Period
Greater of: —
—
ns N = prescale value
20 or TCY + 40
(2, 4, ..., 256)
N
45* TT1H
T1CKI High Synchronous, No Prescaler 0.5 TCY + 20 —
—
ns
Time
Synchronous, with Prescaler
15
—
—
ns
Asynchronous
30
—
—
ns
46* TT1L
T1CKI Low Synchronous, No Prescaler 0.5 TCY + 20 —
—
ns
Time
Synchronous, with Prescaler
15
—
—
ns
Asynchronous
30
—
—
ns
47* TT1P
T1CKI Input Synchronous
Period
Greater of: —
—
ns N = prescale value
30 or TCY + 40
(1, 2, 4, 8)
N
Asynchronous
60
—
—
ns
48
FT1
Timer1 Oscillator Input Frequency Range
(oscillator enabled by setting bit T1OSCEN)
32.4
32.768 33.1 kHz
49* TCKEZTMR1 Delay from External Clock Edge to Timer
Increment
2 TOSC
— 7 TOSC — Timers in Sync mode
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
FIGURE 23-11: CAPTURE/COMPARE/PWM TIMINGS (CCP)
CCPx
(Capture mode)
Note: Refer to Figure 23-2 for load conditions.
CC01
CC02
CC03
TABLE 23-6: CAPTURE/COMPARE/PWM REQUIREMENTS (CCP)
Standard Operating Conditions (unless otherwise stated)
Operating Temperature -40°C TA +125°C
Param
No.
Sym.
Characteristic
Min.
Typ† Max. Units
Conditions
CC01* TccL CCPx Input Low Time
No Prescaler 0.5TCY + 20 —
—
ns
With Prescaler
20
— — ns
CC02* TccH CCPx Input High Time
No Prescaler 0.5TCY + 20 —
—
ns
With Prescaler
20
— — ns
CC03* TccP CCPx Input Period
3TCY + 40 —
—
ns N = prescale value (1, 4 or 16)
N
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
2010 Microchip Technology Inc.
DS41417A-page 217
Share Link: 