PIC16F753-I/SLQTP View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC16F753-I/SLQTP

14/16-Pin, Flash-Based 8-Bit CMOS Microcontrollers

Microchip Technology 

PIC16F753/HV753

22.8 DC Characteristics: PIC16F753/HV753-I (Industrial)

PIC16F753/HV753-E (Extended) (Continued)

DC CHARACTERISTICS

Standard Operating Conditions (unless otherwise stated)

Operating temperature

-40°C  TA  +85°C for industrial

-40°C  TA  +125°C for extended

Param.

No.

Sym.

Characteristic

Min.

Typ† Max. Units

Conditions

Capacitive Loading Specs on

D101* CIO

All I/O pins

—

—

50

pF

Program Flash Memory

D130 EP

Cell Endurance

10K

100K

—

E/W -40°C  TA +85°C

D130A ED

Cell Endurance

1K

10K

—

E/W +85°C  TA +125°C

D131 VPR

VDD for Read

VMIN

—

5.5

V VMIN = Minimum operating

voltage

D132 VPEW VDD for Bulk Erase/Write

4.5

—

5.5

V

D132A VPEW VDD for Row Erase/Write

VMIN

—

5.5

V

D133 TPEW Erase/Write cycle time

—

2

2.5

ms

D134 TRETD Characteristic Retention

40

—

—

Year Provided no other specifications

are violated

* These parameters are characterized but not tested.

† Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are

not tested.

Note 1: Negative current is defined as current sourced by the pin.

2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent

normal operating conditions. Higher leakage current may be measured at different input voltages.

3: This specification applies to RA3/MCLR configured as RA3 with the internal weak pull-up disabled.

4: This specification applies to all weak pull-up pins, including the weak pull-up found on RA3/MCLR. When RA3/MCLR is

configured as MCLR Reset pin, the weak pull-up is always enabled.

 2013 Microchip Technology Inc.

Preliminary

D40001709A-page 197

Share Link: