PIC16C711-04I/SP View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC16C711-04I/SP

8-Bit CMOS Microcontrollers with A/D Converter

Microchip Technology 

PIC16C71X

Applicable Devices 710 71 711 715

TABLE 11-6:

A/D CONVERTER CHARACTERISTICS:

PIC16C710/711-04 (COMMERCIAL, INDUSTRIAL, EXTENDED)

PIC16C710/711-10 (COMMERCIAL, INDUSTRIAL, EXTENDED)

PIC16C710/711-20 (COMMERCIAL, INDUSTRIAL, EXTENDED)

PIC16LC710/711-04 (COMMERCIAL, INDUSTRIAL, EXTENDED)

Param Sym Characteristic

No.

Min

Typ†

Max Units

Conditions

A01 NR Resolution

—

—

8-bits

bit VREF = VDD, VSS ≤ AIN ≤ VREF

A02 EABS Absolute error

—

—

<±1

LSb VREF = VDD, VSS ≤ AIN ≤ VREF

A03 EIL Integral linearity error

—

—

<±1

LSb VREF = VDD, VSS ≤ AIN ≤ VREF

A04 EDL Differential linearity error

—

—

<±1

LSb VREF = VDD, VSS ≤ AIN ≤ VREF

A05 EFS Full scale error

—

—

<±1

LSb VREF = VDD, VSS ≤ AIN ≤ VREF

A06 EOFF Offset error

—

—

<±1

LSb VREF = VDD, VSS ≤ AIN ≤ VREF

A10 — Monotonicity

— guaranteed

—

— VSS ≤ VAIN ≤ VREF

A20 VREF Reference voltage

2.5V

—

VDD + 0.3 V

A25 VAIN Analog input voltage

VSS - 0.3

—

VREF + 0.3 V

A30 ZAIN Recommended impedance of

—

—

10.0

kΩ

analog voltage source

A40 IAD A/D conversion current (VDD)

—

180

—

µA Average current consumption

when A/D is on. (Note 1)

A50 IREF VREF input current (Note 2)

10

—

1000

µA During VAIN acquisition.

Based on differential of VHOLD to VAIN.

To charge CHOLD see Section 7.1.

—

—

10

µA During A/D Conversion cycle

*

†

Note 1:

2:

These parameters are characterized but not tested.

Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and are not

tested.

When A/D is off, it will not consume any current other than minor leakage current.

The power-down current spec includes any such leakage from the A/D module.

VREF current is from RA3 pin or VDD pin, whichever is selected as reference input.

© 1997 Microchip Technology Inc.

DS30272A-page 99

Share Link: