PIC16F1512T-E/SO View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
PIC16F1512T-E/SO Datasheet PDF : 360 Pages
| |||
PIC16(L)F1512/3
21.0 CAPTURE/COMPARE/PWM
MODULES
The Capture/Compare/PWM module is a peripheral
which allows the user to time and control different
events, and to generate Pulse-Width Modulation
(PWM) signals. In Capture mode, the peripheral allows
the timing of the duration of an event. The Compare
mode allows the user to trigger an external event when
a predetermined amount of time has expired. The
PWM mode can generate Pulse-Width Modulated
signals of varying frequency and duty cycle.
This family of devices contains two standard Capture/
Compare/PWM modules (CCP1 and CCP2).
The Capture and Compare functions are identical for all
CCP modules.
Note 1: In devices with more than one CCP
module, it is very important to pay close
attention to the register names used. A
number placed after the module acronym
is used to distinguish between separate
modules. For example, the CCP1CON
and CCP2CON control the same
operational aspects of two completely
different CCP modules.
2: Throughout this section, generic
references to a CCP module in any of its
operating modes may be interpreted as
being equally applicable to CCPx module.
Register names, module signals, I/O pins,
and bit names may use the generic
designator ‘x’ to indicate the use of a
numeral to distinguish a particular module,
when required.
DS40001624C-page 228
2012-2014 Microchip Technology Inc.
Share Link: 