PIC16F1512T-E/SO View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC16F1512T-E/SO

28-Pin Flash Microcontrollers with XLP Technology

Microchip Technology 

PIC16(L)F1512/3

Another connector often found in use with the PICkit™

programmers is a standard 6-pin header with 0.1 inch

spacing. Refer to Figure 23-2.

FIGURE 23-2:

PICkit™ PROGRAMMER STYLE CONNECTOR INTERFACE

Pin 1 Indicator

Pin Description*

1

1 = VPP/MCLR

2

3

2 = VDD Target

4

3 = VSS (ground)

5

6

4 = ICSPDAT

5 = ICSPCLK

6 = No Connect

* The 6-pin header (0.100" spacing) accepts 0.025" square pins.

For additional interface recommendations, refer to your

specific device programmer manual prior to PCB

design.

It is recommended that isolation devices be used to

separate the programming pins from other circuitry.

The type of isolation is highly dependent on the specific

application and may include devices such as resistors,

diodes, or even jumpers. See Figure 23-3 for more

information.

FIGURE 23-3:

TYPICAL CONNECTION FOR ICSP™ PROGRAMMING

External

Programming

Signals

VDD

VPP

VSS

Data

Clock

VDD

Device to be

Programmed

VDD

MCLR/VPP

VSS

ICSPDAT

ICSPCLK

*

*

*

To Normal Connections

* Isolation devices (as required).

 2012-2014 Microchip Technology Inc.

DS40001624C-page 267

Share Link: