PIC16LF1906T-I/SO View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC16LF1906T-I/SO

28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers with LCD Driver and nanoWatt XLP Technology

Microchip Technology 

PIC16LF1904/6/7

MOVIW

Syntax:

Operands:

Operation:

Status Affected:

Move INDFn to W

[ label ] MOVIW ++FSRn

[ label ] MOVIW --FSRn

[ label ] MOVIW FSRn++

[ label ] MOVIW FSRn--

[ label ] MOVIW k[FSRn]

n  [0,1]

mm  [00,01, 10, 11]

-32  k  31

INDFn  W

Effective address is determined by

• FSR + 1 (preincrement)

• FSR - 1 (predecrement)

• FSR + k (relative offset)

After the Move, the FSR value will be

either:

• FSR + 1 (all increments)

• FSR - 1 (all decrements)

• Unchanged

Z

Mode

Syntax

mm

Preincrement

++FSRn

00

Predecrement

--FSRn

01

Postincrement

FSRn++

10

Postdecrement

FSRn--

11

Description:

This instruction is used to move data

between W and one of the indirect

registers (INDFn). Before/after this

move, the pointer (FSRn) is updated by

pre/post incrementing/decrementing it.

Note: The INDFn registers are not

physical registers. Any instruction that

accesses an INDFn register actually

accesses the register at the address

specified by the FSRn.

FSRn is limited to the range 0000h -

FFFFh. Incrementing/decrementing it

beyond these bounds will cause it to

wrap-around.

MOVLB

Syntax:

Operands:

Operation:

Status Affected:

Description:

Move literal to BSR

[ label ] MOVLB k

0  k  15

k  BSR

None

The five-bit literal ‘k’ is loaded into the

Bank Select Register (BSR).

MOVLP

Syntax:

Operands:

Operation:

Status Affected:

Description:

Move literal to PCLATH

[ label ] MOVLP k

0  k  127

k  PCLATH

None

The seven-bit literal ‘k’ is loaded into the

PCLATH register.

MOVLW

Syntax:

Operands:

Operation:

Status Affected:

Description:

Words:

Cycles:

Example:

Move literal to W

[ label ] MOVLW k

0  k  255

k  (W)

None

The eight-bit literal ‘k’ is loaded into W

register. The “don’t cares” will assem-

ble as ‘0’s.

1

1

MOVLW 0x5A

After Instruction

W = 0x5A

MOVWF

Syntax:

Operands:

Operation:

Status Affected:

Description:

Words:

Cycles:

Example:

Move W to f

[ label ] MOVWF f

0  f  127

(W)  (f)

None

Move data from W register to register

‘f’.

1

1

MOVWF OPTION_REG

Before Instruction

OPTION_REG = 0xFF

W = 0x4F

After Instruction

OPTION_REG = 0x4F

W = 0x4F

DS41569A-page 232

Preliminary

 2011 Microchip Technology Inc.

Share Link: