PIC16LF1906T-I/SO View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC16LF1906T-I/SO

28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers with LCD Driver and nanoWatt XLP Technology

Microchip Technology 

PIC16LF1904/6/7

22.0 ELECTRICAL SPECIFICATIONS

Absolute Maximum Ratings(†)

Ambient temperature under bias....................................................................................................... -40°C to +125°C

Storage temperature ........................................................................................................................ -65°C to +150°C

Voltage on VDD with respect to VSS ................................................................................................... -0.3V to +4.0V

Voltage on MCLR with respect to Vss ................................................................................................. -0.3V to +9.0V

Voltage on all other pins with respect to VSS ........................................................................... -0.3V to (VDD + 0.3V)

Total power dissipation(1) ............................................................................................................................... 800 mW

Maximum current out of VSS pin, -40°C  TA  +85°C for industrial............................................................... 300 mA

Maximum current out of VSS pin, -40°C  TA  +125°C for extended .............................................................. 95 mA

Maximum current into VDD pin, -40°C  TA  +85°C for industrial.................................................................. 250 mA

Maximum current into VDD pin, -40°C  TA  +125°C for extended ................................................................. 70 mA

Clamp current, IK (VPIN < 0 or VPIN > VDD)20 mA

Maximum output current sunk by any I/O pin.................................................................................................... 25 mA

Maximum output current sourced by any I/O pin .............................................................................................. 25 mA

Note 1: Power dissipation is calculated as follows: PDIS = VDD x {IDD –  IOH} +  {(VDD – VOH) x IOH} + (VOl x IOL).

† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions above those

indicated in the operation listings of this specification is not implied. Exposure above maximum rating conditions for

extended periods may affect device reliability.

 2011 Microchip Technology Inc.

Preliminary

DS41569A-page 237

Share Link: