PIC18LF8410-I/PTQTP View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC18LF8410-I/PTQTP

64/80-Pin Flash Microcontrollers with nanoWatt Technology

Microchip Technology 

PIC18F6310/6410/8310/8410

26.3 DC Characteristics: PIC18F6310/6410/8310/8410 (Industrial)

PIC18LF6310/6410/8310/8410 (Industrial) (Continued)

DC CHARACTERISTICS

Standard Operating Conditions (unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +85°C for industrial

Param

No.

Symbol

Characteristic

Min

Max Units

Conditions

VOL Output Low Voltage

D080

I/O ports

—

0.6

V IOL = 8.5 mA, VDD = 4.5V,

-40°C to +85°C

D083

OSC2/CLKO

(RC, RCIO, EC, ECIO modes)

—

0.6

V IOL = 1.6 mA, VDD = 4.5V,

-40°C to +85°C

VOH Output High Voltage(3)

D090

I/O ports

VDD – 0.7

—

V IOH = -3.0 mA, VDD = 4.5V,

-40°C to +85°C

D092

OSC2/CLKO

(RC, RCIO, EC, ECIO modes)

VDD – 0.7

—

V IOH = -1.3 mA, VDD = 4.5V,

-40°C to +85°C

D150 VOD Open-Drain High Voltage

—

8.5

V RA4 pin

Capacitive Loading Specs

on Output Pins

D100(4) COSC2 OSC2 pin

—

15

pF In XT, HS and LP modes

when external clock is

used to drive OSC1

D101 CIO

D102 CB

All I/O pins and OSC2

(in RC mode)

SCL, SDA

—

50

pF To meet the AC Timing

Specifications

—

400

pF I2C Specification

Note 1: In RC oscillator configuration, the OSC1/CLKI pin is a Schmitt Trigger input. It is not recommended that the

PICmicro® device be driven with an external clock while in RC mode.

2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified

levels represent normal operating conditions. Higher leakage current may be measured at different input

voltages.

3: Negative current is defined as current sourced by the pin.

4: Parameter is characterized but not tested.

DS39635A-page 354

Preliminary

 2004 Microchip Technology Inc.

Share Link: