ST92T163N4D0 View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

ST92T163N4D0

8/16-BIT FULL SPEED USB MCU FOR COMPOSITE DEVICES WITH 16 ENDPOINTS, 20K ROM, 2K RAM, I2C, SCI, & MFT

STMicroelectronics 

ST92163 - SERIAL COMMUNICATIONS INTERFACE (SCI)

SERIAL COMMUNICATIONS INTERFACE (Cont’d)

8.4.3 SCI Operating Modes

8.4.3.1 Asynchronous Mode

In this mode, data and clock can be asynchronous

(the transmitter and receiver can use their own

clocks to sample received data), each data bit is

sampled 16 times per clock period.

The baud rate clock should be set to the ÷16 Mode

and the frequency of the input clock (from an ex-

ternal source or from the internal baud-rate gener-

ator output) is set to suit.

8.4.3.2 Asynchronous Mode with Synchronous

Clock

In this mode, data and clock are synchronous,

each data bit is sampled once per clock period.

For transmit operation, a general purpose I/O port

pin can be programmed to output the CLKOUT

signal from the baud rate generator. If the SCI is

provided with an external transmission clock

source, there will be a skew equivalent to two

INTCLK periods between clock and data.

Data will be transmitted on the falling edge of the

transmit clock. Received data will be latched into

the SCI on the rising edge of the receive clock.

Figure 73. Sampling Times in Asynchronous Format

SDIN

rcvck

rxd

0 12345

7 8 9 10 11 12 13 14 15

rxclk

LEGEND:

SIN: Serial Data Input line

rcvck: Internal X16 Receiver Clock

rxd: Internal Serial Data Input Line

rxclk: Internal Receiver Shift Register Sampling Clock

VR0 0140 9

152/224

Share Link: