MX29F040
ABSOLUTE MAXIMUM RATINGS
RATING
VALUE
Ambient Operating Temperature -40oC to 85oC
Storage Temperature
-65oC to 125oC
Ambient Temperature with Power -55oC to 125oC
Applied
Applied Input Voltage
-0.5V to 7.0V
Applied Output Voltage
-0.5V to 7.0V
VCC to Ground Potential
-0.5V to 7.0V
A9 & OE
-0.5V to 13.5V
NOTICE:
Stresses greater than those listed under ABSOLUTE
MAXIMUM RATINGS may cause permanent damage to
the device. This is a stress rating only and functional
operational sections of this specification is not implied.
Exposure to absolute maximum rating conditions for
extended period may affect reliability.
NOTICE:
Specifications contained within the following tables are
subject to change.
READ TIMING WAVEFORMS
VIH
Addresses
VIL
VIH
CE
VIL
WE
VIH
VIL
OE
VIH
VIL
ADD Valid
tCE
tOE
tACC
tDF
tOH
Outputs
VOH HIGH Z
VOL
DATA Valid
HIGH Z
COMMAND PROGRAMMING/DATA PROGRAMMING/ERASE OPERATION
DC CHARACTERISTICS (TA = 0oC to 70oC, -40oC to 85oC,VCC = 5V±10%)
SYMBOL
PARAMETER
ICC1 (Read) Operating VCC Current
ICC2
ICC3 (Program)
ICC4 (Erase)
ICCES
VCC Erase Suspend Current
MIN. TYP MAX. UNIT CONDITIONS
30
mA
IOUT=0mA, f=5MHz
50
mA
IOUT=0mA, F=10MHz
50
mA
In Programming
50
mA
In Erase
2
mA
CE=VIH, Erase Suspended
NOTES:
1. VIL min. = -0.6V for pulse width is equal to or less than 20ns.
2. If VIH is over the specified maximum value, programming
operation cannot be guaranteed.
3. ICCES is specified with the device de-selected. If the
device is read during erase suspend mode, current draw
is the sum of ICCES and ICC1 or ICC2.
4. All current are in RMS unless otherwise noted.
P/N:PM0538
REV. 2.3, DEC. 10, 2004
14