PIC16CR58AT-10E/SP View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
PIC16CR58AT-10E/SP Datasheet PDF : 217 Pages
| |||
PIC16C5X
19.4
DC Characteristics: PIC16C54B/C54C/C55A/C56A/C57C/C58B-04, 20, PIC16LCR5X-04 (Commercial)
PIC16CR54B/CR54C/CR56A/CR57C/CR58B-04, 20 (Commercial)
PIC16CR5X-04I, 20I (Commercial)
PIC16C54B/C54C/C55A/C56A/C57C/C58B-04I, 20I, PIC16LC5X-04I (Industrial)
PIC16C54B/C54C/C55A/C56A/C57C/C58B-04E, 20E (Extended)
DC Characteristics
All Pins Except
Power Supply Pins
Standard Operating Conditions (unless otherwise specified)
Operating Temperature 0°C ≤ TA ≤ +70°C (commercial)
–40°C ≤ TA ≤ +85°C (industrial)
–40°C ≤ TA ≤ +125°C (extended)
Operating Voltage VDD range is described in Section 19.1, Section 19.2 and
Section 19.3.
Characteristic
Sym
Min
Typ(1) Max Units
Conditions
Input Low Voltage
VIL
I/O Ports
I/O Ports
MCLR (Schmitt Trigger)
T0CKI (Schmitt Trigger)
OSC1 (Schmitt Trigger)
OSC1
VSS
— 0.8 VDD V 4.5V <VDD ≤ 5.5V
VSS
— 0.15 VDD V otherwise
VSS
— 0.15 VDD V
VSS
— 0.15 VDD V
VSS
— 0.15 VDD V RC option only(4)
0.3 VDD — XT, HS and LP options
Input High Voltage
VIH
2.0
—
VDD
I/O ports
0.25 VDD+0.8V —
VDD
MCLR (Schmitt Trigger)
0.85 VDD
—
VDD
T0CKI (Schmitt Trigger)
0.85 VDD
—
VDD
OSC1 (Schmitt Trigger)
0.85 VDD
—
VDD
OSC1
0.7 VDD
—
VDD
V 4.5V < VDD ≤ 5.5V(5)
V otherwise
V
V
V RC option only(4)
V XT, HS and LP options
Hysteresis of Schmitt
VHYS 0.15VDD*
—
—
V
Trigger inputs
Input Leakage Current(3) IIL
I/O ports
MCLR
T0CKI
OSC1
For VDD ≤ 5.5V
-1.0
0.5
+1.0
µA VSS ≤ VPIN ≤ VDD,
Pin at hi-impedance
-5.0
—
+5.0
µA VPIN = VSS +0.25V(2)
0.5
+3.0
µA VPIN = VDD(2)
-3.0
0.5
+3.0
µA VSS ≤ VPIN ≤ VDD
-3.0
0.5
—
µA VSS ≤ VPIN ≤ VDD,
XT, HS and LP options
Output Low Voltage
VOL
I/O ports
OSC2/CLKOUT
—
—
0.6
V IOL = 8.7 mA, VDD = 4.5V
—
—
0.6
V IOL = 1.6 mA, VDD = 4.5V,
RC option only
Output High Voltage
VOH
I/O ports(3)
VDD-0.7
—
—
V IOH = -5.4 mA, VDD = 4.5V
OSC2/CLKOUT
VDD-0.7
—
—
V IOH = -1.0 mA, VDD = 4.5V,
RC option only
* These parameters are characterized but not tested.
Note 1: Data in the Typical (“Typ”) column is based on characterization results at 25°C. This data is for design guidance
only and is not tested.
2: The leakage current on the MCLR/VPP pin is strongly dependent on the applied voltage level. The specified lev-
els represent normal operating conditions. Higher leakage current may be measured at different input voltage.
3: Negative current is defined as coming out of the pin.
4: For the RC option, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the PIC16C5X be
driven with external clock in RC mode.
DS30453B-page 176
Preliminary
© 1998 Microchip Technology Inc.
Share Link: 