ST72262G1 View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

ST72262G1

8-BIT MCU WITH FLASH OR ROM MEMORY, ADC, TWO 16-BIT TIMERS, I2C, SPI, SCI INTERFACES

STMicroelectronics 

ST72260G, ST72262G, ST72264G

6.4 SYSTEM INTEGRITY MANAGEMENT (SI)

The System Integrity Management block contains

group the Low voltage Detector (LVD), Auxiliary

Voltage Detector (AVD) and Clock Security Sys-

tem (CSS) functions. It is managed by the SICSR

register.

6.4.1 Low Voltage Detector (LVD)

The Low Voltage Detector function (LVD) gener-

ates a static reset when the VDD supply voltage is

below a VIT- reference value. This means that it

secures the power-up as well as the power-down

keeping the ST7 in reset.

The VIT- reference value for a voltage drop is lower

than the VIT+ reference value for power-on in order

to avoid a parasitic reset when the MCU starts run-

ning and sinks current on the supply (hysteresis).

The LVD Reset circuitry generates a reset when

VDD is below:

– VIT+ when VDD is rising

– VIT- when VDD is falling

The LVD function is illustrated in Figure 14.

Figure 14. Low Voltage Detector vs Reset

The voltage threshold can be configured by option

byte to be low, medium or high.

Provided the minimum VDD value (guaranteed for

the oscillator frequency) is above VIT-, the MCU

can only be in two modes:

– under full software control

– in static safe reset

In these conditions, secure operation is always en-

sured for the application without the need for ex-

ternal reset hardware.

During a Low Voltage Detector Reset, the RESET

pin is held low, thus permitting the MCU to reset

other devices.

Notes:

The LVD allows the device to be used without any

external RESET circuitry.

The LVD is an optional function which can be se-

lected by option byte.

VDD

VIT+

VIT-

Vhys

RESET

24/171

Share Link: